Resources for assembling an engine

[clarkwhoracing]

Where can I find good resources for assembling an engine?

Torque specs for head - pattern, intake, exhaust etc.

Any help would be great since I am going to start assembling a motor to go into my lebaron.

Thanks

[raccoon]

haynes helms manuals.

If your friends with a mechanic, they can print you out the specs. most I know use a database called mitchell on demand.

[clarkwhoracing]

Got those - just wanted to make sue when I put the head on that I did it right and not have any issues down the road.

Tips, tricks or anything else would help.

[cordes]

There is nothing better than the FSM.

[omni_840]

There is nothing better than the FSM.

+1 on these

[clarkwhoracing]

Well should be fun - I had help pulling the motor and I have done gaskets, cleaning and repairs and seems as if I am not getting the help putting it back together.

Bad thing is that it was kinda a free for all pulling it so bolts are everywhere and I can hopefully match everything up and not miss a nut or bolt.

Should be a good learning experience and hopefully if I get into a jam I can get a hand lent to me.

[MopàrBCN]

send me a pm with your email... I may be able to help out