Enkei Shogun Wheels 17" Delivery to SDAC

[minigts]

I have a set of 17" Enkei Shogun wheels, ET is 32-35mm, I believe, 17x7 dual drill.

I can get pictures of them before SDAC, but more than willing to deliver to the show next week if anyone is interested. Price is $150 for wheels and tires. Two tires are in very good shape, about 50% or better tread left. The other two need to be replaced, but only because I had the camber on the wheels WAAAY positive. The tread on the inner part of the tires are actually better than the other two.

Pictures to come later today (hopefully), but if anyone is interested in a delivery to SDAC let me know.

BTW, these wheels are the same ones that are on Turbo224's red Daytona if you are interested in seeing what they look like on that style car. Here are a couple of links of the wheels on my car as it was a couple of years ago.

http://minigts.com/car/charger/side.jpg

http://minigts.com/car/charger/exterior/side-1.jpg

And the set is all 4 wheels, tires and center caps. Oh and it takes special lugs and an allen head type head to remove the lugs, which will be included as well. Actually, I think I have two sets of the lugs or almost 2 full sets, so all of that is in the deal.

[89ShelbyGuy]

Woah....i am almost tempted!!!! Awesome price though! those will go really quick!!!! BUMP!!

[turboshadow]

Ill take them at SDAC

[minigts]

Done. I'll be sure to bring everything along and get you some pictures close up of them today. They have been sitting in my garage for the past 2 years and I need to do something with them.

Thanks!

[turboshadow]

thank you What kind of tires are on them?

[minigts]

All four are Toyo FZ4 215/40-17. The rims MAY be 7.5, but I think these are 7" wide. They sat PERFECT on my Charger and I mean perfect. The offset was so that the wheels sat in line with the lip of the fender at the top. And it handled much better with these wheels vs. what I have now, which is a 42mm ET! But I had to get the ones I have now as they are a better look and I got a killer deal on them. Depending on what they are going on, they may rub on the tranny on a full turn, but not uncommon. I eliminated that problem by getting a lower ratio rack. No rubbing on the transmission, but I have to do a 12 point turn to get into parking spaces.

[turboshadow]

Sounds good they will be going on the shadow for now and maybe make there way onto my shelby charger some day down the road.

[minigts]

Here are some pictures of the wheels. I should have asked for more, these are in great shape. I did forget about a place where I curb one on the spoke, but it was as I was parking in reverse, so just scraped it. It's apparent to some degree, but definitely fixable.

I tried to get a good shot of the tires treadwear, but the best I could get is the one you see. They have about 50%? And the two that are worn bad have that much or less as you get closer to the face of the rim. The outer tread is at the indicators, so they have SOME life, but probably best for burnouts or something.

So the wheels are sold as of now and one wanting them if that deal doesn't work.

Oh and the one wheel that I also have a close up of is tar, not a scratch. I checked it, but didn't take the time to clean it off. If you need the originals so you can zoom in, let me know. And I think I still have the extra lettering that comes with these wheels in the event that the Enkei Sportline comes off.

[Juggy]

killer deal!!

.....want to sell that rad out of your car???? lol :P

[minigts]

Which one, the factory one or the super duper awesome aluminum one I had custom made for the Charger that will fit perfectly in any Charger with very little modification? THAT one? No, I will have to pass. I do have the factory TII rad and IC for sale and can bring to SDAC. I will give a great deal on both, $60 and delivered to SDAC.

[Clay]

wish I would have seen this yesterday when my freakin internet was down all day

I would have snagged these in a heartbeat!!!!!!!!!!

[minigts]

FYI to anyone interested, these were sold at SDAC as planned.