Results 1 to 4 of 4

Thread: SMEC flashing questions.

  1. #1
    Hybrid booster
    Join Date
    Jan 2007
    Location
    Glen Burnie, MD
    Posts
    528

    SMEC flashing questions.

    The 85 GLHT I picked up this weekend has a flashable setup on it. I tried to connect with D-Cal but I'm having some problems and was hoping someone here can help.

    I was told the car is currently running a "stock" s60 cal. I connected the serial interface to my laptop and brought up d-cal. I turned on the power interupt power, then selected connect in the flash menu (I've tried every combo of 16, 32, and com port), once prompted I turn the ignition to run and then click ok; but I always get an "ack" error about the ecu not communicating. What settings should I have for my com port? Anyone else had this issue and solved it? Thanks.
    No fun cars any more :(

  2. #2
    Hybrid booster
    Join Date
    Jan 2007
    Location
    Glen Burnie, MD
    Posts
    528

    Re: SMEC flashing questions.

    I figured it out, stupid mistake of course.
    No fun cars any more :(

  3. #3
    Garrett booster
    Join Date
    Dec 2005
    Location
    Mission City, British Columbia
    Posts
    88

    Re: SMEC flashing questions.

    So what was it? Maybe somebody can learn something.

  4. #4
    Hybrid booster
    Join Date
    Jan 2007
    Location
    Glen Burnie, MD
    Posts
    528

    Re: SMEC flashing questions.

    I had a disconnected wire.

    Funny enough it stopped responding again a few weeks ago (I checked the wires this time) so I'm once again trying to diagnose the issue. I'll post back if I figure it out.
    No fun cars any more :(

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •