simplest 16 valve head swap

[GLHNSLHT2]

RDI bought and buys all the Masi stuff he can get his hands on for the most part. He bought all of Mopars old stock and sold it off. Last I heard he has zero NOS heads anymore. Yes he makes some nice cash but works hard for it. He called me at 11:30pm his time the other night to discuss what I wanted done to my head. He had just finished up working. Poor guy. But he's one of the nicest guys you'll ever meet. Hopefully one day I'll be able talk to him without it being over the phone or email.

[turbovanman²]

I wouldn't mind seeing an 11th Masi L body running around Look around, check RDI, dealer, whatever stones you can turn over etc, if you don't come up with a head I *may* have a spare head or a whole motor, but be warned, they are pricey. Even a motor with 0 compression in one hole is a $3500. prospect

Thats why I'd stick with a TIII, you can buy a car for less than that, not that I recommend you do that,

RDI bought and buys all the Masi stuff he can get his hands on for the most part. He bought all of Mopars old stock and sold it off. Last I heard he has zero NOS heads anymore. Yes he makes some nice cash but works hard for it. He called me at 11:30pm his time the other night to discuss what I wanted done to my head. He had just finished up working. Poor guy. But he's one of the nicest guys you'll ever meet. Hopefully one day I'll be able talk to him without it being over the phone or email.

Thats cool, heard good things about him,

[bgbmxer]

whole motor would not be a bad idea you have all the brackets and such which helps out

[ShelGame]

B&G Chrysler has a couple of race-prepped Masi heads/motors for sale for (relatively) reasonable prices : http://www.bgchrysler.com/What_s_New/what_s_new.html

1992 #7 GTU Daytona Engine assy, Chrysler factory 2.3L,16V DOHC Maserati head,Crower billet crank,Titaninum rods,Venolia pistons, Kinsler fuel injection,Header,300+ HP $4,000

1990 Maserati TC 16valve DOHC cylinder head assy,under 500 miles run time,w/intake & exhaust manifolds $2,000

1990 Maserati TC 16valve DOHC complete engine & trans assy, 27,000 miles,only 500 of these vehicle were sold with this drivetrain (Rare). $3,000

[2.216VTurbo]

RDI bought and buys all the Masi stuff he can get his hands on for the most part. He bought all of Mopars old stock and sold it off. Last I heard he has zero NOS heads anymore. Yes he makes some nice cash but works hard for it. He called me at 11:30pm his time the other night to discuss what I wanted done to my head. He had just finished up working. Poor guy. But he's one of the nicest guys you'll ever meet. Hopefully one day I'll be able talk to him without it being over the phone or email.

Well then, you can meet him in Detroit at SDAC

[turbovanman²]

B&G Chrysler has a couple of race-prepped Masi heads/motors for sale for (relatively) reasonable prices : http://www.bgchrysler.com/What_s_New/what_s_new.html

Not bad prices, way outta my league though, lol!

[bgbmxer]

still not sure yet on which one seeing as i dont have the cash anyways but will this winter so will scavenge then

[GLHNSLHT2]

I'm not going to Sdac though.

[amcpacer]

Come on now Masi Heads are not that rare. I have a masi head in the closet with a set of pistons. I should hurry up and sell it to someone who actually intends to use it. LOL.

[bgbmxer]

yea like me in a few months will make some big power with it

[bgbmxer]

and another thing how did they get 2.3 liters out of it

[amcpacer]

I believe both the 16V lotus and 16V masi are 2.2.

[bgbmxer]

in some of the articles it says its 2.2 and others it says the masi is 2.3 its weird so how much would you want for that head

[turbovanman²]

2.3 is a typo, Dodge never sold a 2.3 turbo engine to the public.

[GLHNSLHT2]

B&G's has a custom crank and rods. Stock they're 2.2 liters.

[2.216VTurbo]

That 2.3 Masi motor that B&G has is a custom Naturallly Aspirated motor. Sky high compression and big cams to get to 300 HP with no turbo...

[turbovanman²]

That 2.3 Masi motor that B&G has is a custom Naturallly Aspirated motor. Sky high compression and big cams to get to 300 HP with no turbo...

Very cool,

[2.216VTurbo]

Come on now Masi Heads are not that rare. I have a masi head in the closet with a set of pistons. I should hurry up and sell it to someone who actually intends to use it. LOL.

Well maybe your Ebay reserve was too ambitious Or that head wouldn't still be in your closet... I had bids on a few of your lots from that motor...

[bgbmxer]

well in a month or two i will be ready to buy a head so let me know