T3 parts cleanout.. head, turbo, computers, wiring, accessories, etc

[omnigoestohell]

Hi all. Just finishing up my T3 project and need to now make space in the garage to park the car so I'm selling off most of my spare T3 parts.
All parts are located in Boston and do not include shipping.

T3 head 90 casting from 91 Spirit R/T w/ ~130k miles on it. No cracks or core plug issues ever. Includes valves, springs and retainers but nothing else. HAS SCORED CAM JOURNALS, might be usable as is, with a hone or may need bearing inserts (you figure it out) $300 - SOLD
T3 a/c compressor $80
T3 intake manifold $75
T3 alternator $35
T3 cruise control servo $25
T3 solid a/c mount bracket $50
T3 water pump $25
T3 Power Steering pump $50
T3 spring loaded serpentine belt tensioner (no pulley) $50
T3 coil pack $75
T3/2.2/2.5 starter w/ 91 T3 starter harness $50
T3 flywheels need resurfacing $50
T3 Turbo - no actuator, shaft feels good. includes swingvalve and o2 sensor $100 - SOLD
91 Spirit R/T ECU - used $100
91 spirit R/T ECU - mopar reman stock - new, never opened $150
91 Spirit R/T engine harness $100
Spirit R/T front engine mount bracket $10
Spirit R/T transmission motor mount $10
2 Spirit R/T Intercooler/Radiator combos - one in nice shape, one could use a rad recore. make offers

[turbovanman²]

You have a PM.

[ShelGame]

From me, too...

[omnigoestohell]

turbo has been sold.

head has been sold.

[glht_omni]

whats the deal with the bad rad? are the endtanks and brass bands that hold the plastic to the core good? just fin damage or rot?

how much for each rad plus shipping to 48060? pics to jkp13182@yahoo.com

[omnigoestohell]

tanks are fine on the "bad" one, the radiator didn't leak last I used it but it was a new england car and the fins do look a bit crusty (reddish). i need to go pull it out of storage and get some pics this week. the good rad is in my basement, came out of a california car at the junkyard and just looks a lot nicer, probably due to the lack of winters. i'll take/post more pictures of everything tonight or tommorow night.

[glht_omni]

let me know what you want for both, so i can take this new T1 rad out of my r/t and have a good one to go back in and see about getting m good core put into the NE one.
thanks.

[turbovanman²]

I guess my money wasn't good enough?

[omnigoestohell]

let me know what you want for both, so i can take this new T1 rad out of my r/t and have a good one to go back in and see about getting m good core put into the NE one.
thanks.

turbovanman: you offered less than the asking price, thats why your money wasn't good enough. i told you if it hadn't sold within a few weeks I would get back in touch.

glht_omni..
here are some pictures of the rad which needs a recore:
i will sell the rad seperately if you dont want the intercooler too..





i have to figure out where i stashed away the nice rad, that will take a few days.

also have a T3 snorkel for sale, $40 + shipping takes it. has typical damage but mount to thermostat housing has been reinforced nicely. - SOLD

[glht_omni]

how much for each rad only? i dont need the ic, i dont even want my stocker, lol.
let me know and i'll decide if i want one or both

[turbovanman²]

And I told you, it was an offer, I then asked for a new total but you never got back to me. Its fine you sold it but you should have told me you don't want the asking price or were looking for a bidding war.

[iTurbo]

Does the snorkel still snap-fit into the airbox and hold? If so I'll take it.

[turbokid]

if the other guy takes the rad, how much for just the i/c?

[omnigoestohell]

Does the snorkel still snap-fit into the airbox and hold? If so I'll take it.

hi jeremy. i'll check on the snap-fit tonight. i also have the airbox avail if you want that too. i'll pm you tonight after i check the fit.

[turbovanman²]

Thanks for the PM, its all good,

[iTurbo]

hi jeremy. i'll check on the snap-fit tonight. i also have the airbox avail if you want that too. i'll pm you tonight after i check the fit.

Ok, let me know. Don't need the airbox though. Thanks.

[omnigoestohell]

Sorry, snorkel doesn't quite "snap" into the airbox any longer although it wouldn't fall out either as long as the nut was used on the t-stat housing. The top goes in nicely but enough of the bottom corner of the flange is gone that it wouldn't snap in anymore.

[glht_omni]

ever dig up the other rad?

[iTurbo]

PM sent.

[denviola]

Do you have the metal coupler for the upper intercooler hoses? This would be the metal hose coupler that has the nipple for attaching the BOV hose.
Thanks
Denny