Results 1 to 9 of 9

Thread: Stock PCV

  1. #1
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Stock PCV

    Turns out the PCV on my Spirit is not there! I need to replace it, but the vac lines are so wacky and have been re-done a number of times so that I can't see how it was supposed to go. So....

    Can someone point me to a good picture/illustration of how it's supposed to look/be?

    Thanks for any and all help!

    Mike
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke

  2. #2
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Sylmar, CA
    Posts
    2,586

    Re: Stock PCV

    Quote Originally Posted by zin View Post
    Turns out the PCV on my Spirit is not there! I need to replace it, but the vac lines are so wacky and have been re-done a number of times so that I can't see how it was supposed to go. So....

    Can someone point me to a good picture/illustration of how it's supposed to look/be?

    Thanks for any and all help!

    Mike

    Get ahold of TurboJerry. LMK if doesn't check in soon and you need his telephone number.
    John Laing

    "The sole condition which is required in order to succeed in centralizing the supreme power in a democratic community, is to love equality, or to get men to believe you love it. Thus the science of despotism, which was once so complex is simplified, and reduced . . . . to a single principle."
    -- Alexis de Tocqueville

    "One of the methods used by statists to destroy capitalism consists in establishing controls that tie a given industry hand and foot, making it unable to solve its problems, then declaring that freedom has failed and stronger controls are necessary."
    --Ayn Rand

    "To evolve, you don't need a Constitution. All you need is a legislature and a ballot box . . . . things will evolve as much as you want. All of these changes can come about democratically; you don't need a Constitution to do that and it's not the function of a Constitution to do that."
    -- Justice Antonin Scalia

  3. #3
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: Stock PCV

    Quote Originally Posted by zin View Post
    Turns out the PCV on my Spirit is not there! I need to replace it, but the vac lines are so wacky and have been re-done a number of times so that I can't see how it was supposed to go. So....

    Can someone point me to a good picture/illustration of how it's supposed to look/be?

    Thanks for any and all help!

    Mike
    Dude, that's not wacky or redone, that's factory TIII if you can believe it! 4 way T's, lines that Y then Y back into eachother at the other end...

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  4. #4
    turbo addict
    Join Date
    Dec 2005
    Location
    Bristol, CT
    Posts
    2,722

    Re: Stock PCV

    Mike, here's a link to a page with the underhood diagram and the FSM diagram. As far as the PCV itself goes I always flipped the connector 180 degrees and put a 3/8 push in style filter on the end. I have one I can send you or I'll give you one at SDAC if you want.

    http://www.pbase.com/rmscott/tiii_vacuum

  5. #5
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Re: Stock PCV

    Quote Originally Posted by 2.216VTurbo View Post
    Dude, that's not wacky or redone, that's factory TIII if you can believe it! 4 way T's, lines that Y then Y back into each other at the other end...
    I'm sure the stock lay-out is worse (more complex) than what's on there now, but I do have missing stuff, such as the PCV and the Charcoal canister and assoc. hoses, etc. The breather just dumps onto the valve cover, lightly coating it (and other stuff) with oil. That I can't abide and neither will the smog tech. The guy I go to is pretty easy to get along with, even though he's test only, but missing stuff ain't going to fly.

    Mike
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke

  6. #6
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Re: Stock PCV

    Quote Originally Posted by Turbo3Iroc View Post
    Mike, here's a link to a page with the underhood diagram and the FSM diagram. As far as the PCV itself goes I always flipped the connector 180 degrees and put a 3/8 push in style filter on the end. I have one I can send you or I'll give you one at SDAC if you want.

    http://www.pbase.com/rmscott/tiii_vacuum
    Thanks for the link, though I seem to be having some trouble getting it to load at the moment, I'll try it again latter. I do want to keep the PCV, I like how it keeps the oil cleaner and remove the moisture from it. At least until I work out a more effective pan-evac system.

    Mike
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke

  7. #7
    turbo addict
    Join Date
    Dec 2005
    Location
    Bristol, CT
    Posts
    2,722

    Re: Stock PCV

    Give me your email addy and I'll send you a scan of each that will print to a full sheet for easy reading.

  8. #8
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Re: Stock PCV

    Quote Originally Posted by Turbo3Iroc View Post
    Give me your email addy and I'll send you a scan of each that will print to a full sheet for easy reading.
    MikeFlynn at NitrousSupply.Com

    Thanks!
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke

  9. #9
    turbo addict
    Join Date
    Dec 2005
    Location
    Bristol, CT
    Posts
    2,722

    Re: Stock PCV

    Check your mail.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •