Hi guys,
I need to use either a TU or FWDP fuel rail with my new intake. My question is how do I (what do i need to) hook up to my stock fuel lines. Details and links/pics would be great. I assume i need some of those fancy red/blue fittings and somehow stainless steel braided hose hooks to them??? Sorry but i have no experience with these types of parts.
Thanks!
Actually I think you can hook up the aftermarket fuel rail just like your stock rail. Depending on your stock rail, you may need to buy just a simple brass nipple to screw into the aftermarket rail, but other than that I think they will bolt right up.Originally Posted by GLHNSLHT2
~Tyler Larsen~Salt Lake City~
-92 Daytona R/T (T3/T4 Hybrid, Quaife, etc...)
-86 Jeep Grand Wagoneer Woody (winter beast)
-01 Audi TT Quattro (daily driver)
-71 Plymouth Cuda 440-6pk tribute
Check out my Homepage
I have a few of the FWDP rails and you don't have to use AN fittings. The ends are tapped 1/4" NPT so all you need is 1/4" NPT -to- 5/16" nipple.
Are you running a seperate fuel pressure reg?
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
No, gonna run a stock fpr. So probably gonna go with the FWD piece. I don't need an AFPR because I have dcal and a flashable smec.
Reply With Quote
