Very cool,
Very cool,
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
are you getting the most out of that set up running the a/fs so rich? wouldnt it have a little more and still be very safe closer to 11:1? are you running Meth injection on that little number? if not I would and id be cranking that fuel down and looking into it and for a turbo car on meth 11.5-11.8 is almost optimal and wow its a monster and still cold on the egts and full of power on high boost
oh just got it going a starting to tune it that was only the second time at the track with the present set up
Next tuning session will be i ann arbor at sdac
Dean Stillie
87 Shelby Z 2.4 Turbo 9.06@146.05
82 Rampage 2.4 Turbo 10.14@138.02
looking forword to it
this was 1/4 or 1/8?
Nick G. 1984 Dodge Rampage
I'm really holding back lol!
.25
Dean Stillie
87 Shelby Z 2.4 Turbo 9.06@146.05
82 Rampage 2.4 Turbo 10.14@138.02
hope everyone can see some low 10 and high 9s out of it
I doubt that will happen
Dean Stillie
87 Shelby Z 2.4 Turbo 9.06@146.05
82 Rampage 2.4 Turbo 10.14@138.02
Yay, I wont be the only one tuning there!Originally Posted by Rampage16V
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Re: Taking the Rampage to the Strip Sunday
Dean, didn't you have a swaybar traction device and a trans brake on that thing? Last thing I remember about it was the day you put a rod through the block. Have you done anything with that stuff since you got it running again?
The sway bar I took back out. And I still haven't got around to playing with the trans brake too much. The mega squirt has launch control which I want to dial in first it can be used as a 2 step as well as retard the timing to get the turbo to spool. I just found out that my srt 4 timing map has had the timing over 15 psi retarded to 14 degrees total before I got it so I have that to look fwd to as well as lean the car out still at 10.9-1 last time out.
Dean Stillie
87 Shelby Z 2.4 Turbo 9.06@146.05
82 Rampage 2.4 Turbo 10.14@138.02
Wow that sucker is light!Nice runs,thats sucker is gonna go when you turn up the wick.
I am serching for a wiring harness for a 1984 rampage do you know where I can get one?
pm gearhead 24-7 (search for a screen name close to that in the members list) he knows where there are a couple in a junk yard
i know where there are a few, all in South East Pa
Reply With Quote
