I believe that is exactly what's needed. You may not need to recompile though, you could probably use dcal to edit the ramps (for some reason they didn't show up in chem when I looked last). In either case, here's what's in the the LB60_stock version which, I believe, had the ramps returned to standard 89 t2.
Code:
; *****************************************
; For each cell, the first number is "rich", the second is "lean".
; If the O2 sensor is returning a lean value, "rich" kicks are added.
; If the O2 sensor is returning a rich value, "lean" kicks are added.
;
; KICK - (factor * 512) - 512 (unsigned number)
; eg: $19 - 1.05 * 512 - 512 - 5%
; *****************************************
; KICKS
; Rich, Lean
;.org 0xc392
PRIRMP_PrimaryKickCell0:
.chem 4 n PrimaryKickCell0 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanKickCell0
.word 0x1a04
;.org 0xc394
PRIRMP_PrimaryKickCell1:
.chem 4 n PrimaryKickCell1 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanKickCell1
.word 0x1a05
;.org 0xc396
PRIRMP_PrimaryKickCell2:
.chem 4 n PrimaryKickCell2 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanKickCell2
.word 0x1a05
;.org 0xc398
PRIRMP_PrimaryKickCell3:
.chem 4 n PrimaryKickCell3 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanKickCell3
.word 0x1a04
;.org 0xc39a
PRIRMP_PrimaryKickCell4:
.chem 4 n PrimaryKickCell4 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanKickCell4
.word 0x1a05
;.org 0xc39c
PRIRMP_PrimaryKickCell5:
.chem 4 n PrimaryKickCell5 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanKickCell5
.word 0x1a05
;.org 0xc39e
PRIRMP_PrimaryKickCell6:
.chem 4 n PrimaryKickCell6 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanKickCell6
.word 0x1a04
;.org 0xc3a0
PRIRMP_PrimaryKickCell7:
.chem 4 n PrimaryKickCell7 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanKickCell7
.word 0x1a05
;.org 0xc3a2
PRIRMP_PrimaryKickCell8:
.chem 4 n PrimaryKickCell8 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanKickCell8
.word 0x1a05
;.org 0xc3a4
PRIRMP_PrimaryKickCellIdle:
.chem 4 n PrimaryKickCellIdle in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanKickIdle_Cell
.word 0x0101
; *****************************************
; The Limits are the maximum number of kicks that may be applied to each
; cell. If the O2 sensor fails to toggle after reaching the limit for more
; than a few seconds, the AutoCal cell gets changed.
; *****************************************
; LIMITS
; Rich, Lean
;.org 0xc3a6
PRIRMP_PrimaryLimitCell0:
.chem 4 n PrimaryLimitCell0 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanLimitCell0
.word 0x0f0f
;.org 0xc3a8
PRIRMP_PrimaryLimitCell1:
.chem 4 n PrimaryLimitCell1 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanLimitCell1
.word 0x1515
;.org 0xc3aa
PRIRMP_PrimaryLimitCell2:
.chem 4 n PrimaryLimitCell2 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanLimitCell2
.word 0x1515
;.org 0xc3ac
PRIRMP_PrimaryLimitCell3:
.chem 4 n PrimaryLimitCell3 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanLimitCell3
.word 0x0f0f
;.org 0xc3ae
PRIRMP_PrimaryLimitCell4:
.chem 4 n PrimaryLimitCell4 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanLimitCell4
.word 0x1515
;.org 0xc3b0
PRIRMP_PrimaryLimitCell5:
.chem 4 n PrimaryLimitCell5 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanLimitCell5
.word 0x1515
;.org 0xc3b2
PRIRMP_PrimaryLimitCell6:
.chem 4 n PrimaryLimitCell6 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanLimitCell6
.word 0x0f0f
;.org 0xc3b4
PRIRMP_PrimaryLimitCell7:
.chem 4 n PrimaryLimitCell7 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanLimitCell7
.word 0x1515
;.org 0xc3b6
PRIRMP_PrimaryLimitCell8:
.chem 4 n PrimaryLimitCell8 in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanLimitCell8
.word 0x1515
;.org 0xc3b8
PRIRMP_PrimaryLimitCellIdle:
.chem 4 n PrimaryLimitCellIdle in_desc 0 65535 in Y 0 256 out PRIRMP RichLeanLimitCellIdle
.word 0x0101
; -----
;.org 0xc3ba