FS- Various Stuff

[88_pacifica]

(1) Mopar Performance, Vol 4 manual and (1) Haynes manual [Daytona]- $20 + shipping for both

(1) One brand new[unused] set of the L-Body gauge white overlay "kit" shown here> gauges - $30 shipped -sold

CB parts- Pics will be up soon

(1) T2 Turbo, big W/G can, ported 2.5 S/V with exhaust doughnut- fully rebuilt/balanced less than 1,000 mi - $350 + shipping

(3) 2.5 Mahle’s .020 oversize, less than 1,000 mi- $30 + shipping

(1) set of 2.2 T2 factory rods with ARP studs(4) - $20 + shipping -sold

(1) T1 Intake manifold with T/B and all sensors(known working), painted Black- $25 + shipping (I can tap for CAI sensor(T2) for addt’l $5)

(1) Exhaust manifold, drilled and tapped for EGT gauge- $20 + shipping

(1) set of rebuilt factory T2 injectors(4) with fuel rail and factory F/P reg, - $30 + shipping -sold

(1) ’89 2.5 SMEC- $25 + shipping

(2) Saab Intercoolers, one with plastic end-tanks, one with aluminum, $25 for plastic one $30 for aluminum one + shipping

(2) small Saab tranny/oil coolers- $15 each + shipping

(1) factory metal Volvo BOV, would require custom application- $15 + shipping

(1) factory ’89 roller cam with followers, very good condition- $20 + shipping -sold

(1) cross-drilled turbo head, new valvesprings, good valves, etc, known good condition- $50 + shipping -sold

(1) set of factory lifters, less than 1,000 mi- $10 + shipping -sold

(1) “turbo” one piece valve cover- $15 + shipping -sold

(1) factory T2 airbox with internal BOV(Masi style) with plastic upper hose/tube removed to allow a larger intake hose/pipe- Includes lower hose(turbo to airbox)- $30 + shipping

(1) NON-CB 2.2 oil pan- $15 + shipping

PM me for any other motor related stuff. I may pull it, I may not. I’ll decide when I hear back from you what it is you need.

* I will combine shipping if you take multiple parts. If my prices are off or you want to make me a different offer(combinations, etc), please PM me. I am merely trying to rid myself of unnecessary TD parts, but I am in no hurry to “offload” these…

[Clay]

Nate -

Ill take the TII rods, the one piece valve cover, and the head.

PM sent

[88_pacifica]

PM answered. Clay has first dibs.

[bradp]

Here are a few pics of Nates Car. It is virtually rust free.

[bradp]

More pics

[88_pacifica]

Yeah, I need to list it too... I will start a thread for it tomorrow. Thanks Brad...

[Mike_Shepard]

bump for a awesome seller

[88_pacifica]

bump for a awesome seller

Thx. I keep forgetting to bump these things.....

[Clay]

oh yeah, and Ill take the l-body gauge overlay as well

[STEVE B]

I need the shaft for the distribitor and the bracket. It is missing from my block.
Thanks
Steve

[88_pacifica]

I need the shaft for the distribitor and the bracket. It is missing from my block.
Thanks
Steve

Are you talking about the intermediate shaft for the disty? Can that be pulled with the motor in the car? I know somebody that has one loose if it can't come out easily but I'm not sure if he has it close. Let me know!

Nate

[bradp]

I have one if you need it. $20 shipped. Nate told me you needed one.

[88_pacifica]

I need the shaft for the distribitor and the bracket. It is missing from my block.
Thanks
Steve

I have one if you need it. $20 shipped. Nate told me you needed one.

I'm not pulling it out of mine, but I know Brad has one(which I told him) and "I condone this message...",

SO, there's your int shaft. PM him for details!

Who's next??

[bradp]

Do you know where I can get a 2.5 commonblock with a window hole in the side Oh wait there are 2 at my house

[88_pacifica]

Do you know where I can get a 2.5 commonblock with a window hole in the side Oh wait there are 2 at my house

Hmmm... I DO know where I can get a non-cb shortblock with an uneven deck surface AND also I know where there's another non-cb longblock that's getting ready to be temporarily installed in a wagon until it decides to let go 5 minutes after it's maiden voyage...

[ShelGame]

Is that a 2.5 tall deck block I see in there? Is it going to be for sale? I could trade you a good CB...

[88_pacifica]

Is that a 2.5 tall deck block I see in there? Is it going to be for sale? I could trade you a good CB...

Rob, unfortunately, no... it was a 2.2 non-CB T1 orig and now has a 2.5 CB. None are the good "tall boys." I would let you know if it was as you've been hunting for a while. What were they originally in again?

[ShelGame]

As far as I know, all pre-'89 2.5's were tall deck. I thought it was because (supposedly) only the 2.5 tall deck engines got the A/C bracket with the slots in it.

I did get one complete 2.5 tall deck engine from Patrick McNamara. But, still looking for 1 more block.

[Turbodave]

As far as I know, all pre-'89 2.5's were tall deck. I thought it was because (supposedly) only the 2.5 tall deck engines got the A/C bracket with the slots in it.

I did get one complete 2.5 tall deck engine from Patrick McNamara. But, still looking for 1 more block.

Actually Rob, all the 86-88 A/C brackets had the slots, this let the same part fit the 2.2 and 2.5.

I've still got a tall deck block here that you can have, can bring it to SDAC for you if you want.

[88_pacifica]

I've still got a tall deck block here that you can have, can bring it to SDAC for you if you want.

There you go, we have a winner...

Who's next???