I'm looking into making an aluminum version of the factory vacuum splitter with fittings instead of well plastic. Does anyone know a good place I could get some fittings the correct size for the smaller hose that are press fit?
I'm looking into making an aluminum version of the factory vacuum splitter with fittings instead of well plastic. Does anyone know a good place I could get some fittings the correct size for the smaller hose that are press fit?
[FONT="Arial Black"][/FONT] ____________________________________________ 92 Voyager LE 3.3/A604 luxury liner 185k [COLOR="Red"]"They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety." Ben Franklin[/COLOR] [COLOR="White"]"It's not tyranny we desire; it's a just, limited, federal government." Alexander Hamilton[/COLOR] [COLOR="Blue"]Support our economy-BUY AMERICA: [url]http://nortonsusa.com/[/url][/COLOR]
I just solder some brass tubing together to make them.
I was kinda thinking along the lines of fittings similar to the ones pressed into the TB and such unless theres a tool I can get to make the fitting end then that would be very easily done with some stainless tubing or something like that.
[FONT="Arial Black"][/FONT] ____________________________________________ 92 Voyager LE 3.3/A604 luxury liner 185k [COLOR="Red"]"They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety." Ben Franklin[/COLOR] [COLOR="White"]"It's not tyranny we desire; it's a just, limited, federal government." Alexander Hamilton[/COLOR] [COLOR="Blue"]Support our economy-BUY AMERICA: [url]http://nortonsusa.com/[/url][/COLOR]
Posting Permissions
Reply With Quote