Cliff R Built A413, S60 wiring harness and PCM

[8valves]

I bought this off of Powermaxx a while back to put into my car, but have no need for it anymore.

Per Cliff this is what's in it;

"5 clutch front, 4 clutch rear clutch packs, 3.4 KD lever, RVMB, 3.02 gear ratio, T/Trac with clutches..."

Cliff Ramsdell "

Works great, no issues. Includes a tranny cooler, TB with kickdown (you don't need it but it goes with the trans).

$750.00 plus shipping (lower 48) OBO.

Let me know if you're interested!


Legit S60 harness from my car. Worked perfectly. Someone has done some wiring work for an O2 sensor on it, with some grounds here and there. Front of the harness has been taped up for cleanliness. Comes with the PCM that is socketed. A custom tune from Paul V will be included, made for my last setup making 407 WHP/395 WTQ at only 24 psi on pump gas. 72pph injectors may be purchased seperately if needed.

$300 plus shipping OBO.

Thanks guys!

[turbovanman²]

Getting out of TM's?

[8valves]

Getting out of TM's?

No, not exactly....

[contraption22]

No, not exactly....

You bought Lee Saunder's Turbo Mopar?

[8valves]

You bought Lee Saunder's Turbo Mopar?

Something like that!

Pssshh, not the one you're thinking of though, you know my budget!

[STEVE B]

Legit S60 harness from my car. Worked perfectly. Someone has done some wiring work for an O2 sensor on it, with some grounds here and there. Front of the harness has been taped up for cleanliness. Comes with the PCM that is socketed. A custom tune from Paul V will be included, made for my last setup making 407 WHP/395 WTQ at only 24 psi on pump gas. 72pph injectors may be purchased seperately if needed.

$300 plus shipping OBO.
Can I see some pictures please fun2.2turbo@juno.com
Thanks

[contraption22]

Bump
The S60 harness is absolutely the easiest way to convert an Lbody to factory turbo electronics.

[8valves]

I'll try to take a picture this evening. Thanks for the bump Mike. It was fantastic, plug it in and drive away<with a big cam, intake, turbo, fuel, etc...>!

[Austrian Dodge]

so, tell us aaron, whats your next project car?
i see you sold both chargers, where's that sweet header going in?

[8valves]

so, tell us aaron, whats your next project car?
i see you sold both chargers, where's that sweet header going in?

Honestly it very likely might be sold before I even use it. Anyone interested?

[8valves]

Harness/PCM/Cal are sold. Thanks.

[Juggy]

Honestly it very likely might be sold before I even use it. Anyone interested?

how much?? my strut tower and frame rail have already been modded to fit

[fastasleep]

8valves, were you able to get a shipping quote?

-Les

[8valves]

8valves, were you able to get a shipping quote?

-Les

You will have one tommorow hopefully! We have connections with a local company that ships freight daily, so I figured I would hold out a few days to try to save you some money. I'll let you know.

Cory- I don't neccissarily have a price on my mind yet. But I will put some thought into it and see if it's really the route I want to take.

[fastasleep]

Thanks. Just keeping it in your mind.

-Les

[8valves]

Transmission is also sold. Thanks everyone.