Does anyone sell this ie: NAPA?
or is FMotion the only place that sells them?
Thanks!
Does anyone sell this ie: NAPA?
or is FMotion the only place that sells them?
Thanks!
They come with the intake/exhaust gasket in the felpro set if I am not mistaken. I know I have one out in the garage that came as a set.
Buy the Felpro intake/exhaust set or I can sell you tons for $5 each plus shipping,
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
TU has them in stock.
Does anyone have a felpro box with the part number on it for the intake halve gasket? I'll see if they can order it in for cheap.
I have one coming to me monday or tuesday. It was shipped out of atlanta this morning. maybe we can work out a way to get it to you.
+1... someone might have a spare they an throw your way cheap, but the felpro manifold set should be like ~$6.99 at your local parts store.Originally Posted by cordes
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
I will go check my parts store tomorrow or sunday.
Thanks guys!
I bought the intake/exhaust gasket kit a couple months ago. It was rediculously cheap at Schucks/Kragen Something like $4. and it had the 2 piece gasket in it!
Hehehe if i had back all the ones that i had thrown out over the years.....
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
Someone could trace an original and make a fullscale drawing.
Then just download, print, cut... and trace it on a sheet of gasket material.
And yes, it would be a half gasket to fit on letter paper then trace, mirror flip, and trace.
Ean Orsel - 1987 Chrysler LeBaron coupe (The Blue Baron) 1987 Chrysler LeBaron coupe (The Silver Cloud) 2002 Chrysler Neon LX (Lex) "It has the turning circle of the moon." -Jeremy Clarkson
Not worth the $4 compared to my personal time, but YMMV.
Why? 9 times out of 10 you need the intake gasket anyhow and as stated, the set is dirt cheap,
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
+1, not worth the time. Now I do have a print with all the whole locations and sizes though. Had to make one to write the program that cuts my upper plenums. But that was way worth it
One of the SDAC-Chicago guys already has a tool to cut them when Felpro dries up
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Reply With Quote
