Does anyone know the part number of the re-useable 413 pan gasket?
Does anyone know the part number of the re-useable 413 pan gasket?
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
I used to have it. It's not in the Chrysler EPC. I just looked.
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
Great! Thanks!!
[SIGPIC][/SIGPIC][FONT=Comic Sans MS]'91 Shadow convertible 2.5 auto, three core RP IC, S60/.48 stg 1, ported two-piece intake/52mm TB, Menegon +1 swirl, 88 turbo cam, Venolias, Crower rods, TU deep sump pan, ported exhaust, 3" from SV to TP, Hughes TC, Peloquin diff, DSS L5 driveshafts, Shelgame cal, Koni struts/shocks. [/FONT]
Deserves a sticky.
Thanks JDAWG!
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
mike - your a mod....... stick away!
Clay
1986 GLH-T - Flat black......... learn it, love it, LIVE IT!
1988 LeBaron GTC Turbo
SDML Readers Rides
C/S Registry
Stuff For Sale
Its in my faq's that Frank refuses to publish, with a ton of other info.
I give up.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Frank Katzenberger
Squirrel Performance - Home of the best turbo calc!!!
http://www.squirrelpf.com
91 Daytona Shelby - It is getting there
87 Shelby CSX #418 - Near stock is a good thing!
94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top
"... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"
Visit the new Knowledge Center today!
Check out the one and only Shelby Dodge Registry!
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Frank Katzenberger
Squirrel Performance - Home of the best turbo calc!!!
http://www.squirrelpf.com
91 Daytona Shelby - It is getting there
87 Shelby CSX #418 - Near stock is a good thing!
94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top
"... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"
Visit the new Knowledge Center today!
Check out the one and only Shelby Dodge Registry!
So its ok to sticky info I've been asking to do for years? WTF, you make zero sense. I am glad I have no part of it anymore.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Hey,
This might be dumb, but why are there three different part numbers listed for the reuseable gasket. And i might as well ask. Which one for a '89 Lebaron GTS with turbo & automatic ?
Those are three different transmissions, hence three different numbers. I'll convert it and make it so it's easy to see and understand:
05011113AA Gasket, Transmission Oil Pan, 31TH <--- This is the A-413 (31TH is the new number designation; 3 speeds, 1 torque rating, Transverse mounted (aka FWD), and Hydraulic valve body control)
05011114AA Gasket, Transmission Oil Pan, 42LE <--- This is the A-606 (the LH car automatic; 4 speeds, 2 torque rating, Longitudinally mounted (as in the LH cars), and Electronic valve body control)
05011115AA Gasket, Transmission Oil Pan, 41TE <--- This is the A-604 (aka Ultradrive) used in all the other FWD OD applications until the new 6 speed auto, which is even based on it came out in 2007; 4 speeds, 1 torque rating, Transverse mounted (aka FWD), and Electronic valve body control)
4269649 Filter, Transmission Pan, 31TH <--- This is the Mopar part number for an A-413/A-404/31TH transaxle pan filter.
For your stated application in your '89 LeBaron GTS, you have the 31TH so you want 05011113AA.
Last edited by fleckster; 09-16-2008 at 07:31 AM.
John M. Fleck
'83 Dodge Rampage 2.2 w/ 2.5L Turbo 14.79@94
'87 Shelby Lancer #213 14.99@94
'89 Chrysler LeBaron GT Turbo 'vert 15.88@92
'92 Dodge Spirit R/T 13.50@104 ; 13.34@102 on slicks
'98 Dodge Neon R/T 15.66@89
'03 Dodge SRT-4 13.91@98
Are these dealer part numbers? Is there a reusable gasket that can be bought from a napa or autozone?
Dealer only.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Good grief old thread, but are these part numbers still available or does anyone have an opinion on a gasket for the 1987 Lancer 3 speed auto trans? Doing maintenance on the car and want to check this off the list.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
I bought that gasket and for the price it's too flimsy. I just use the rubber one that comes with the aftermarket filter kit. If you get a kit and it has cork ask for a different brand. There's no reason to use cork in 2015. I wouldn't use one on a customers car but since I'm under my van often and do my own oil changes, it's nothing to give the bolts (or in my case nuts because I have studs) a twist to keep it from leaking. I pull my pan too often to use silicone.
Is it metal or plastic for the Chrysler gasket ?
1994 Shadow Sedan. 2.2 N/A, A568 400,000 miles. "the science experiment"
1987 Shelby CSX #418. Long term rebuild and restore ?
The ones i have are metal backing. I don't have a problem with them but they don't seem as great as a factory ford trans pan gasket. Those are kind of my gold standard.
Dont push the red button.You hear me?
The ones I got for the 42LE are a metal shim with a sealing bead on the inside edge. Not as nice as the 727/904 gaskets for sure. Ford I believe even goes as far as stamping the inside bottom of the pan 'this gasket is reusable' or something like that. They also include a drain plug. Two things that Chrysler would never have the intelligence to do
1994 Shadow Sedan. 2.2 N/A, A568 400,000 miles. "the science experiment"
1987 Shelby CSX #418. Long term rebuild and restore ?