I thought I had a bad wheel bearing on the omni, and while looking it over I noticed that the caliper bolt had actually backed out on the LF. I put the caliper back on and replaced the pin. The next day I tried to take it to work and the pedal was very hard and the car was moving like one of the calipers was locked up. This may or may not have been the case since I was trying to come out of my garage into some snow, so that could have thrown the feel off I suppose. The brakes were very spongy on my way to and from school.
I can't see any fluid leaking from anywhere and I bleed the brakes with a vacuum brake bleeder deal that I picked up from sears yesterday. The old fluid was very dark brown and I now have clear fluid coming through the system, but it seems like there are still a ton of bubbles coming out also. I am thinking that it is probably my tool that I picked up.
Are there any tests I can do to see if perhaps my MC has gone bad on me etc? I am at a loss here as this is actually the first time I have had to bleed my brakes.
Thanks guys.