On your site it says you can bend up to 4inch pipe but I see no listings, I really need some 4inch Ubends for a downpipe do you guys have any?
On your site it says you can bend up to 4inch pipe but I see no listings, I really need some 4inch Ubends for a downpipe do you guys have any?
We can actually bend up to 8" tube, but we dont have the die sets. We have some u-bends in mild steel.
Cost?
So what diamter is the largest you have die sets to do?Originally Posted by Racing-Solutions
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
4" is the biggest die set we have right now. Die cost at these sizes is pretty insane so we are moving slowly - very slowly into bigger sizes.
On the ubends, I will have to get back to you on a price on monday. I bent these ubends over a year and a half ago so I need to find them and check stock and price on them and make sure they arent a big rusted pile of crap now.
Discounts on big rusted piles of crap because it's for an exhaust lol
Any word on the 4inch Pipe?
My downpipe is itching to be made
I'd also be curious on 4" pipe. B stock is fine as it's exhaust as well.
I'm moving that direction too, 4" side exit. The ATP 3" to 4" DP with O2 and wideband bungs looks promising...
We have some 4" x 8" radius in stock. If you guys are looking for a tighter radius, we will have 4" x 6" in early may.
I need a 4x6. LMK when there ready.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
I still need the 1 4"X8" U bend for my holset... Actually if you have a 90^ that would be better.
okey dokey... it's may.....you have this yet???
Our 4" tooling came in early august -- a few months late. We are going to start product offering early september. Please don't wait on us though. We are running 3 weeks behind as is.
If you need 4" exhaust this person might be able to help out.
http://www.weldingweb.com/showthread.php?t=13459
4" Bends are now in stock and added to the website.
-Adam