super 70 turbos and misc items

[85glht]

I have for sale 2 super 70 turbos. Both are from Turbo Engineering Corp in Colorado.

One of them I have removed from my car last winter. It is in perfect shape and I wouldn't hesitate to just bolt in this turbo in your car and go.
It comes turbo only, no waste gate can or swing valve.
I'm looking for $350 for this turbo. SOLD

The second turbo was removed from a friends car. The exhaust side looks wet, like from antifreeze?? It may be due to the engine removal but I don't know. I wasn't there when they pulled the engine.
There isn't any play in the shaft. This turbo does have a small waste gate can but no swing valve.
I'm looking for $300 for this one.

I have two 2.5 inch swing valves.... $20 each BOTH SOLD

I also have a ported turbo II exhaust manifold. It has been ceramic coated and there is a fitting for an egt gage at the turbo mounting flange. $75 for this. SOLD!!

And last but not least I have a ported turbo I intake and down draft throttle body that has been bored to 46mm. This intake came from a spearco kit, so you can intercool your turbo I. Make offer!

O.K. contact me via email........ blue73dart@sbcglobal.net

I do take paypal and pics on request. Shipping is extra.

Thanks

[BadAssPerformance]

Got any more detail on which wheels and housings the 'super 70' turbos have?

[tryingbe]

PM and e-mail sent for the 2.5 swingvalves, consider them sold.

[stargazer7467]

emailed on the swingvalve

[stargazer7467]

---- do you really need both of them?

[jl93sundance]

pm'd on swingvalve this morning.

[boost geek]

I can't find a compressor map for a super 70. How will it work on an 8 valve 2.2?

[85glht]

I can't find a compressor map for a super 70. How will it work on an 8 valve 2.2?

It was on an 8 valve motor (that is all I have). Basically they took my turbo II turbo and machined and installed a Buick Grand National compressor wheel. The exhaust side is .63 from my car. The other turbo, the exhaust side I'm not sure, I don't see any markings on the housing, but I believe that it may be a .48.
Thanks for asking

[85glht]

I'm reponding to the emails first....... chronologically

[moparzrule]

What turbine housings do they have? What turbine wheel?

[boost geek]

Paypal sent...

[85glht]

What turbine housings do they have? What turbine wheel?

The one I had on my car is a .63 with a stock wheel.

The other I believe it is a .48. I don't see any castings on the exhaust housing indicating what it is. I think the wheel is stock also.

I do know that the car this was on, an 87 shadow, went 110 mph in the quarter on a 2.5 engine and a 88 roller cam and a cal from Cindy. so, it will make power and I think it needs new seals.

I hope this helps.

[boost geek]

Which one needs new seals?

[boost geek]

It's all good!

[jl93sundance]

paypal payment sent also...

[speedfreek500]

I need a turbo you got one?p.m if you do

[85glht]

I need a turbo you got one?p.m if you do

I do have another turbo. The shaft has no play but the exhaust side is wet from oil. I don't know if it was from the engine removal process or if the seal is shot. I wasn't there when my friend pulled the engine out of his car.

There isn't any markings on the exhaust housing indicating if it is a .63 a/r. I believe that it is a .48.

This turbo was rebuilt by TEC http://www.turboengineering.com/. It is their stage two.

This turbo was in a Shadow, w/ a 2.5 and the cars best mph was 110.

That is all I know about it. I can send pics via e-mail
blue73dart@sbcglobal.net. Let me know

Dave