-
93 SMEC and Turbo
I'm trying to convert a 93 3.0 V6 SBEC auto Van to a 2.5 5speed turbo.
The problem I've heard is that The body computer will not comunicate with the Turbo 90/91 SBEC...Atleast what what I hear.
So is it currently possible with D-cal to Change 90 Turbo SBEC to allow it to communicate with the body computer?
Also Can I socket my 93 SBEC an us my 93 V6 harness and just change the plug ends so it will work with a turbo motor or would it be easier to swap to a turbo Harness (SBEC or SMEC)
Any suggestions to under take this are very much welcome
Thanks Guys
-
Visit www.boostbutton.com...
Turbo Mopar Contributor
Re: 93 SMEC and Turbo
I think you should be able to re-calibrate the V6 ECU to run the '92/93 turbo code (I know you can with the '89 SMEC). But, no one has posted the '92/93 turbo code yet.
-
Re: 93 SMEC and Turbo
So what your saying is I need to find a 92 Turbo SBEC and Get the Chip out..without cutting the pins...and post it...I'm on it!
-
Visit www.boostbutton.com...
Turbo Mopar Contributor
Re: 93 SMEC and Turbo
Well, if you find a '92 Turbo SBEC, don't cut it up, just use it!
-
Re: 93 SMEC and Turbo
well then how will we get the code up for others to use
So really I could just buy a 92 Cal from FWDperformance Plug it in and Go?
Last edited by CanadianDaytona; 01-23-2008 at 12:18 AM.
-
Visit www.boostbutton.com...
Turbo Mopar Contributor
Re: 93 SMEC and Turbo
I don't see why not - '92 Daytona's and LeBaron's had the BC too...
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules