-
TII Parts, 3" Downpipe
Name: Nate Henjes
Location: Lincoln, NE
Contact: impuresoul2k3@yahoo.com
Price: Check individual part description, does not include shipping
Description:
I have no idea on prices, but they are required so make an offer if you don't like them. Prices do not include shipping
TII Forged Crank, Came from an 87 Shelby Z, will need to be turned as it spun a rod bearing. $60+shipping
http://smg.photobucket.com/albums/v6...soul2k3/Crank/
TII Rods, spun a bearing so again, will need to be turned. $30+shipping
http://smg.photobucket.com/albums/v6...esoul2k3/Rods/
I have a TII turbo that needs to be rebuilt. The shaft will free spin maybe a 1/4 of a turn, it has the exhaust housing with studs, but will not come with a compressor housing unless you want an early style TI housing, $20
http://smg.photobucket.com/albums/v6...soul2k3/Turbo/
TII Oil Pan and Pickup, came out of a car that spun a rod bearing, but I'll make sure there are no clogs in the pickup tube, $20
TII Valve cover, it is painted red/black right now, but I can wire brush all the paint off for you so you can paint it yourself if needed, $15
TII Exhaust Manifold, has some surface rust but not like anyone is going to be checking out the back of your engine $15
3" Down Pipe, pressbent but bolts to a 2.5" swingvalve PENDING
Thanks!
Last edited by turbodaytona87; 02-10-2008 at 03:34 PM.
-
Re: FS: Forged Crank and Rods
$60 + shipping for the crank(should be around $30 depending on zipcode), $30+shipping for the rods
-
Re: FS: Forged Crank and Rods
-
turbo addict
Re: FS: Forged Crank and Rods
What year stuff? Common block or non?
-
Hybrid booster
Re: FS: Forged Crank and Rods
-
Re: FS: Forged Crank and Rods
Both are from an 87 Shelby Z, non common block, 8 bolt flywheel.
-
Re: FS: Forged Crank and Rods
Here are pics of the rods, I tried to get a picture showing the part number but it didn't come out too well, the part number is 4323958
http://smg.photobucket.com/albums/v6...esoul2k3/Rods/
-
Re: FS: Forged Crank and Rods
-
two point two much fun
Turbo Mopar Staff
Re: FS: Forged Crank and Rods
I'm interested in the rods, the three good ones that is. The one that bearing spun in is of no interest to me.
Can you get me a price with shipping to 60046.
Dave Tekampe
Director SDAC National
VP SDAC-Chicago
85 GLH-Turbo (DC intercooled)
86 GLHS #107
87 GLHS #148
87 CSX #161, #608, #674
88 CSX-T #529, #541
89 Shadow Competition Package and lots more...
-
Re: FS: Forged Crank and Rods
Sorry I didn't see this earlier still interested?
-
Re: FS: Forged Crank and Rods
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules