Anybody know what the boost limit is on the stock T3 injectors? Cause I'm getting close to putting on my MBC and 3" exhaust! Think I'll be alright at 13-14 psi? Thanks.
Michael
Anybody know what the boost limit is on the stock T3 injectors? Cause I'm getting close to putting on my MBC and 3" exhaust! Think I'll be alright at 13-14 psi? Thanks.
Michael
I am running about 12-13psi on my stock injectors, but I do have a AFPR (set to stock at the moment). I have never had a problem leaning out or anything, but I have heard that running that kind of boost puts the injectors past the recomened duty cycle and is not good for the injectors. At minimum get a good a/f meter and keep an eye on it, but to be safe (and if you plan on upgrading more) I would get you some +20's from one of the vendors. Hope that helps!
Alright sounds good. I just ordered my boost guage so I'll be able to install my MBC. I'll just keep it limited to 12 psi for now until I can get my A/F meter! Thanks man.
Michael
Posting Permissions
Reply With Quote