Just curious what an unrun Turbonetics Super60 is worth...
No swingvalve but it has the wastegate can
Thanks,
Just curious what an unrun Turbonetics Super60 is worth...
No swingvalve but it has the wastegate can
Thanks,
Well from TU they are $725 without the can or swingvalve. But you'd never get that selling it outright on TM. You may get $600 if you are lucky.
http://turbosunleashed.com/shop/prod...roducts_id=125
$600?
I think I'd fall over if I saw one sell for that much new on TM or the "other" site...
Well if it's a true brand new S60 with the .63 turbine housing and a large can swingvalve I think you could get in the range of $500-600. They are $725 from TU without the wastegate can! I know I've seen a used one sell for $400 without anything, and a new one for $500 bare also. So you should atleast bare minimum get $550.
bought mine new for $500 with can and swingvalve.
What are the specs on the S60? A/R? Comp housing inlet size?
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Same as stock T2 (.42 A/R and 2.35'' inlet) except a slightly larger compressor wheel on the inducer. Turbine wheel is the same, but a .63 A/R turbine housing is put on instead of the stock .48.
well same compressor housing a/r but it's not just a stock housing, it's a totally new casting where the inlet is ported/machined to be nice and high flow, and the exit is also opened up alot compared to stock.
I was gonna mention that but I couldn't remember whether it was the turbonetics S60 or some other turbo I was thinking of. I didn't want to get blasted for being wrong, so since I wasn't sure I didn't say anything.
Last edited by BadAssPerformance; 12-29-2007 at 09:59 PM.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Her are the pics of the turbo, but the swingvalve was sold since I picked up a TU 3 inch...
Still unrun, capped and with the VSR tag...
Which A/R on the turbine housing?
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Turbonetics T3 Super 60 A\R.63 Stage 1 Turbo
Cool
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Looks like one from Ebay.
i have the same turbo with the balance tag and all . i know the one i have came from mopar . jdawg ordered it from a dealer warehouse a couple years ago .
billy
Last edited by grim; 12-30-2007 at 11:48 AM. Reason: added more/spelling
Ya, just wanted to see what they were worth...
Wanted to upgrade to a T3/T4...
Anywho, thanks for the replies
So, is it for sale? TurboRon was looking for one... but I'm pretty sure hes got an FM E2 on the way.
Last edited by BadAssPerformance; 12-30-2007 at 12:42 PM.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
i bought my turbonetics S60 for $500cad about 4 years ago NEW IN BOX!!!! and that included a new 2.5" SV, .63 turbine and new large WG can.