In need of a few things...

[envyyourethics]

Battery tray p body.
both fenders p-body
manual window conversion pieces
trim clips early p-body
87 performance lm
Big Brake set up
a520 trans plate
blow through throttle cable
window scrapers(haha worth a shot)
overflow bottle, TII if that matters
exhaust cutout
oil pressure gauge and hardware
1 Pass side 16"pumper
new style sundance tails, if they will fit on a 87
fuel pump, performance or a stock low milage, dont trust my 16x,xxx pump
passenger motor mount, poly only
poly alt bushing only one
UD pully(89 2.5 CB)
catch can
high flow muffler cat, or full exaust
87 pm (unless a 86 pm will work)



All of this is for a 88' shadow es/87'shadow es mutt of a resto.

Combining the two to make one, haha

Going 87' electronics, TII 2.5 CB, A520, 88' shell, ect

I realize that i can get this all new or at a yard easy, but its winter and i don't want to have to crawl in the snow for hours.

Anything else you think would be cool, help the resto, anything you think i "need". Let me know.

[envyyourethics]

Also need a clutch, at least tII spec, but open to alot of options.

[jaysshelby]

I have a brand new Walbro stock replacement fuel pump kit. has pump, sock and other misc. pieces. if interested its your cheap.

[1FastCSX289]

Ive got two P-body fenders in nice shape (need paint, but no noteworthy rust or dents). Shoot me a PM with an offer. Not looking to get a ton of money I just want to cover my time for finding a box, packaging and shipping them out. I also might have an inexpensive Sunpro oil pressure gauge.....if youre interested in that too.

[envyyourethics]

pms sent

Also need a vac block prefer with fittings.

[envyyourethics]

Ok

Now have:

Oil gauge
Fuel pump
Clutch
Alt bushings
Fenders
UD pully
overflow bottle
87 socketed lm

You guys are fast!

Still in need of:

Battery tray p body.
trim clips early p-body
Big Brake set up
a520 trans plate
blow through throttle cable
exhaust cutout
1 Pass side 16"pumper
new style sundance tails, if they will fit on a 87
passenger motor mount, poly only (if any one has a used cheap one)
catch can
high flow muffler cat, or full exhaust

[envyyourethics]

[moparzrule]

Just FYI, any 85-87 power module will work as long as it's from a turbo engine. TBI doesn't work.

[turbokid]

ok what are window scrapers? we have a ton of sundances and shadows in the yard and plenty with great looking doors

[moparzrule]

The rubber things the whole way along the bottom of the window that ''scrape'' off water or whatever is on the window when it goes down.

[envyyourethics]

UpUpUP

[envyyourethics]

still in need of:

Battery tray p body.
trim clips early p-body
Big Brake set up
a520 trans plate
blow through throttle cable
1 Pass side 16"pumper
passenger motor mount, poly only (if any one has a used cheap one)
catch can
high flow muffler cat, or full exhaust