Uhh...

[20w/ashelby]

I mostly just wanted to be the first to start a thread....but. Has anyone seen one on a lot yet? When are they to be released?

[85glht]

I thought that they were already out. Haven't seen one yet

[mcsvt]

only seen them on ebay so far...

[BadAssPerformance]

I visited ArvinMeritor in Belvidere (across the street from the Chrysler plant) and saw one on Rt 20

[Vigo]

i only have one thing to say about the turbo caliber.



vastly superior

[8valves]

They're running around CTC all the time. I think they look pretty damn good, and the one we were showing at Mopar Nats at the trailer was quite nice inside. I'm still not big on them, but it's alright I guess.

[20w/ashelby]

I'm not at all a fan of caliber's in general and this is no exception. Even with that being said I would still like some time behind the wheel of one. I'm sure it will be a while before I see one around here.

[WVRampage]

I test drove an R/T when they first came out,the other day I had a chance to drive the 2.0 sxt around a bit,Im still not impressed but from what I have heard te trans will last along time since its the same as the one in the nissan with a V-6.

[20w/ashelby]

Cvt = Gay

[ShadowFromHell]

I cant wait untill the turbo 2.4 is stuffed into the avenger. It shouldnt require much more then a harness, and its a much larger, more practical car.

and then all I would need is a wrecked one to swap my 08.... haha

[Mario]

I've only seen one without a manufacturer's plate running around so far. I hate to admit it, but it doesn't look all that bad. The front of it is pretty menacing.

[The Pope]

I cant wait untill the turbo 2.4 is stuffed into the avenger. It shouldnt require much more then a harness, and its a much larger, more practical car.

and then all I would need is a wrecked one to swap my 08.... haha

The R/T Avernger is sweet, 18" wheels and 14" brakes. It has the 3.5 24v V6 and AWD. What they need to do is put some real tires and wheels under the Avenger and turbo the V6. 400 HP from a 3.5 is a cake walk and AWD would make it a real killer. SRT 6 anyone?

The Masduh 3 turbo is great, the first POS FWD from Japan that has a faster 1/4 mile ET than the 84 Dodge Colt turbo. But the Colt had a gearing advantage, they pull 4,000 RPM in forth at 70 MPH and weigh nothing. Can't wait for the street drags to reopen, going to make a lot of money this summer

[devlish]

yeah... i think the new avenger looks like ALL the other chrysler cars.. should have stuck with it being a 2door. just for kicks. but i suppose all the kids that had the avenger in highschool are not having families and the 4door makes sense in that manner.

as for the caliber... it's got something unique about it. not sure what it is. don't think i'd want one... but it's not terrible either

[SwiftTech]

i've checked with the dealers in my area and they say they should have them sometime next year, probably when the challenger comes out too. I'm not a big fan of the regular caliber, but I do want to check out the SRT4 version of it.

[Keito]

http://www.srtforums.com/forums/f258...-wagon-407910/

Darrell Cox Racing already has one.
Did 37 dyno pull the first 24 hours it was in their posession.
Obviously he's getting the jump on the competition
when it comes to performance parts.
Here's his list for people who don't want to head over to the forum.

A few DCR Caliber Products in the works!

-Already we are working on the DCR Caliber 2.8 Liter Big Bore Sleeve & Stroker Kit with DCR MADI Crank
-DCR Caliber Big Bore Sleeve Kits...Feb-March 08
-DCR Caliber Pistons+Rods...Jan.08
-DCR Caliber Pro Series Cylinder Heads...Jan.08
-DCR Caliber Oversize SS Valves...Feb.08
-DCR Caliber BeeHive Valve Springs and Ti Retainers...Feb.08
-DCR Caliber Variable Timing Performance Cams...Feb.08
-DCR Caliber CNC Deck Block Guard...Feb.08
-DCR Caliber Billet Strap Kit...Jan.08
-DCR Caliber Complete Oiling System...Jan.08 but DCR/Caliber Big Filter Kit...in stock as of today 12/12/07
-DCR Caliber Windage Tray, Crank Scraper, and Baffle...Jan.08
-DCR Caliber AEM FIC Engine Controller...now available
-DCR Caliber Pro Series Turbo Kits...available now and built to order
-DCR Caliber Pro Series Intake Kit... available now and built to order
-DCR Caliber AntiSurge/3 Inch Inlets...available now and built to order
-DCR Caliber Upgrade 49LB Wheel Turbos...available now and built to order
-DCT Caliber Tial 38mm External Waste Gate (for stock turbo setup)....available now and built to order
-DCR Caliber Stainless Steel Exhaust...next week
-DCR Caliber 180 Thermostat...in stock
-DCR Caliber 22 PSI Radiator Cap...in stock
-DCR Caliber 3 Inch Air Intake...available now
-DCR Caliber Light Weight Battery Kit with Tray...available now
-DCR Caliber Motor Mounts...filled and available now
-DCR Caliber DSS Level 5 Axles...Feb.-March 08
-DCR Caliber Upgraded Fuel Injectors...Jan.08
-DCR Caliber Billet Fuel Rails -w-Aux Ports...finishing proto type tomorrow and available next week
-DCR Caliber PCV Check Valves...available now
-DCR Caliber 5 Layer Head Gasket...next week
-DCR Caliber NGK Iridium Spark Plugs...next week...multi heat ranges
-DCR Caliber SS O2 Housing Catless Down Pipe...available now and built to order.
-DCR Caliber Water/Meth Injection Kits...in stock
-DCR Caliber 255 Fuel Pump with the DCR exclusive Bypass Mod...next week
-DCR Caliber Push To Connect Fuel Return Line Kit...next week
-DCR Caliber BOV Shim Kit & Mopar Blow Off Valves...in stock
-DCR Caliber Positive Traction Kits...Jan-Feb 08
-RealTune Caliber LFM Intercoolers...soon
-RealTune Caliber Internal Waste Gate Actuators....soon

[contraption22]

Interesting that a few of the first things on the list were things to strengthen the open-deck block.

[WVRampage]

Wow thats cool that they already have everything ready go so that they will perform like the old SRT-4

[contraption22]

Wow thats cool that they already have everything ready go so that they will perform like the old SRT-4

Still waiting on the Stage 7 Unfuglifier Package from Mopar.

[firebaron90]

Local dodge dealer just got one in....... looks cool.


Joe

[Clay]

Still waiting on the Stage 7 Unfuglifier Package from Mopar.

Yup, its a $15,000 option. It involves removing the radiator cap, and driving an Neon SRT4 under it.