Results 1 to 8 of 8

Thread: TU cal/injectors/MAP combo

  1. #1
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    TU cal/injectors/MAP combo

    I have an 87' TU cal from my daytona. Here's the specs of my setup that I had and it ran 1500 EGT's (probe in #4 cylinder) and idled at 22 inches vacuum-
    2.2L
    Stage 1 G head
    88' turbo roller cam
    2 piece intake
    ported exhaust manifold
    Super 70 w/.63 stage 1
    Dual stock core IC
    3'' exhuast
    22 PSI/pump gas 93 octane
    3 bar MAP
    +40's

    At 19 PSI and only 4 degrees ignition advance I put 260 WHP down. I found out later that my timing light was off, that pissed me off because I wanted to hit 300 WHP that day and probably could have with more boost and good timing. But now my car is wrecked and I'm parting it. Obviously you can get another chip for the socketed ECU if you want to make changes, but I want $275 shipped for all 3...meaning the logic module, +40's, and 3 bar MAP sensor all in excellent condition. Injectors have not even 10K on them.

    Also have-
    stock T2 lower hose- $40 shipped
    turboXS type H BOV mounted on 2.25'' pipe-$90 shipped
    Isspro boost gauge 30-0-25 mounted in the stock location, can get pics...$30 shipped
    2 gauge Pillar pod for daytona, painted gray with real interior paint not just crappy spray bomb stuff-$25 shipped

    Can't think of anything else right now, I will just go get some pics and post them up here. Paypal preferred.

  2. #2
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    Re: TU cal/injectors/MAP combo

    Sorry no pics today, I will get them tomorrow.

  3. #3
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    Re: TU cal/injectors/MAP combo

    Gauge pod sold.
    Cal/injectors/MAP pending payment.

    New items-
    3 way PCV in good shape with filter, very rare and hard to find! $15 shipped
    Strut tower caps-15 shipped
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Boost gauge.JPG 
Views:	90 
Size:	50.0 KB 
ID:	46   Click image for larger version. 

Name:	PCV pipe.JPG 
Views:	96 
Size:	50.0 KB 
ID:	47   Click image for larger version. 

Name:	BOV.JPG 
Views:	87 
Size:	53.9 KB 
ID:	48   Click image for larger version. 

Name:	Strut caps.JPG 
Views:	77 
Size:	55.4 KB 
ID:	49  

  4. #4
    Mitsu booster
    Join Date
    Dec 2005
    Location
    Regina,Saskatchewan
    Posts
    12

    Re: TU cal/injectors/MAP combo

    do you still have the bov? Would you sell it for $90 shipped to canada. if you will PM me your address, and I can paypal the money to you.

    Thanks,
    Steve Z

  5. #5
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    Re: TU cal/injectors/MAP combo

    BOV is sold, injectors/MAP/cal sold.
    Only things left are the T2 lower hose, PCV, strut tower caps, and boost gauge in the message center.

  6. #6
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Duncan, Vancouver Island, BC, Canada
    Posts
    935

    Re: TU cal/injectors/MAP combo

    did you get my PM on the other site yet about the gauge pod and AFPR? i sent you a M/O

  7. #7
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    Re: TU cal/injectors/MAP combo

    Still have-
    T2 lower hose-35 shipped
    PCV-12 shipped
    strut tower caps-12 shipped
    boost gauge in the message center-20 shipped

    New items-
    87' rear louvers, stripped and repainted with brackets- $30 P/U
    Autometer sport comp fuel pressure gauge, mechanical 0-100 PSI. Comes with the block that goes in the line and fittings and SS braided hose-$35 shipped. I'll get a pic of all that tomorrow.

  8. #8
    Hybrid booster Turbo Mopar Contributor Austrian Dodge's Avatar
    Join Date
    Dec 2005
    Location
    Vienna, Austria (Europe)
    Posts
    860

    Re: TU cal/injectors/MAP combo

    matt, will those strut tower caps fit a '92 G-Body?
    If so, how much shipped to 1150 in Europe?

    thanks

Similar Threads

  1. TU Cast Iron Hybrid Headers Now Accepting Pre-Orders
    By Chris W in forum Turbos Unleashed
    Replies: 146
    Last Post: 11-19-2010, 02:07 AM
  2. TU at Chryslers@Carlise July 11th through 13th
    By Chris W in forum Turbos Unleashed
    Replies: 4
    Last Post: 07-28-2008, 02:15 PM
  3. TM is now the only forum for TU contact/support
    By Chris W in forum Turbos Unleashed
    Replies: 0
    Last Post: 01-09-2008, 05:25 PM
  4. F/S: TU Socketed 87 TU T2 3bar/+40 LM
    By shelbyplaya in forum Parts For Sale
    Replies: 6
    Last Post: 11-05-2007, 04:52 AM
  5. Tu VNT header install
    By 90Dodgevnt in forum TIV Setup - Factory VNT Turbos!
    Replies: 10
    Last Post: 12-25-2006, 08:56 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •