Well, we'll see....
OK, trans is back in, all back together, fresh oil change, new harness (last one expired 8/31) , on the slicks, ready to get loadd up tomorrow and go to the track *fingers crossed*
Well, we'll see....
OK, trans is back in, all back together, fresh oil change, new harness (last one expired 8/31) , on the slicks, ready to get loadd up tomorrow and go to the track *fingers crossed*
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Uh, maybe you should try to get to bed before 1 am then
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
Its only 12:07 here
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
good luck!
Good luck! Let us know how it goes!
James Reeves - Reeves Racing
World's Fastest 8 Valve - 146.88 mph
86 GLH-T 9.99 at 143.78 mph
86 GLHS #169 Mom's - complete Super 60 car
87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
88 Shelby Z 13.5 - been in storage for 15 years
03 SRT-4 12.24 Mom's
07 Charger 5.7L 12.48 Dad's
Thanks guys, going to load it up right now!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
first monster going down now, then time to load up.... see u there JT
LOL, cool, just talked to Tommy, he's loading up too
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
10.50's, right?
LOL, wishful thinking Pat... I got the mile per hour tho...
Trip to Grove today...
Run #1 - Right off the trailer, spun out of the hole, missed 2nd bad but got third granny style after misisng 2nd LOL! but made some big end power
R/T: .075
60': 1.818
330': 5.665
1/8ET: 8.255
1/8mph: 100.14
1000'ET: 10.325
1/4ET: 12.043
1/4mph: 132.60
Run #2 - spun in 1st, drove thru it till it caught up and missed 2nd AGIAN but not too bad of a run for missing a gear
R/T: .025
60': 1.754
330': 5.039
1/8ET: 7.536
1/8mph: 102.85
1000'ET: 9.570
1/4ET: 11.275
1/4mph: 133.25
3rd felt good, although I granny shifted it, still felt good. Not sure what happened to 2nd... feels like crap, even driving around the pits... guess its gotta come apart again.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Not "double Clutchin" like ya should?
Good Numbers JT! I'd be happy it went back together and functioned!
LOL, as waiting for that Nope, not double clutching, you got me
Thanks... and yeah, 2nd is not happy, even before the 1st pass.... so it only partially finctioned, LOL!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
At slow speeds it kind of just grinds as it goes into gear but goes right in... at 7000 rpm it made a bad grinding sound and just didnt go in. I did flip the 1-2 pads so the frsh side was on 2nd, maybe that was a mistake?
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Prolly. Dang things. My money's on one pad being half gone. Were these still plastic?
Get to thrashing! My little brother really wants to see the Daytona. I believe he said something to the effect of, "The only Daytonas that run 10's have a V8 under the hood." He will be at St. Louis this coming week watching you (bracket) race the Daytona (Shadow).
Seriously, get the transmission finished and back in the car. I'll help you finish things up in the hotel parking lot Thursday night/Friday morning.
bummer JT! But I know you'll get it back together and functioning right...
"I'll give you anything you'll ever need and I'll find a way to turn you into a monster."
minor details, however the damn thing was making some power!!!! holy mph batman!!!
Those were the brass ones... the 2nd gear side was smashed just like the plastic ones do tho (pics of both sides attached). Hmm.. I could put the nice plastic ones on 5th gear there? ... or is it somethign else? definitely makes that ZZzhiiiing! sound going into gear that we all know and associate with shift fork issues tho...
I'll tear into it tomorrow after work and see what it is. Would love to bring for sure so youand your bro can see it and piss some v8 guys off
BTW, Thanks for the offer! I'm a little too anal with that car to wrech on it in parking lots tho hopefully it gets back together, its more fun and less work than trying to go rounds with the 13.00 Shadow, LOL... you see those R/T's from today? Damn fast car is making me late in the Shadow now
Yeah, hopefully this week... busy at work too, we'll see.
Yeah, it felt STRONG on the big end
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
So were those the soft brass or the bronze ones you just had made?
Bryan
86 GLHS #161, 2016 Impala
SDAC National Member, SDAC Buckeye Chapter Member
A man has got to know his limitations.....