Page 64 of 170 FirstFirst ... 145460616263646566676874114164 ... LastLast
Results 1,261 to 1,280 of 3392

Thread: BadAss SRT-Z - 2.4L / A568 - Update!!!

  1. #1261

    Re: BadAss SRT-Z Update!!!

    Check the Al plate for flatness.

  2. #1262
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    The bearing plate... check. Yeah, the steel backing plate is a tad small on A568...

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  3. #1263
    ...on your color TV screen... Turbo Mopar Contributor Reeves's Avatar
    Join Date
    Jan 2006
    Location
    Kentucky
    Posts
    4,860

    Re: BadAss SRT-Z Update!!!

    How does the bearing look/feel on the other side of the main shaft?
    Was the retainer ring on the bearing still in tact?
    Did the retainer ring have a good *squish* between the 2 plates (i.e. not much clearance?)

    That's the only thing that keeps the main shaft from walking.

    James Reeves - Reeves Racing
    World's Fastest 8 Valve - 146.88 mph
    86 GLH-T 9.99 at 143.78 mph
    86 GLHS #169 Mom's - complete Super 60 car
    87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
    88 Shelby Z 13.5 - been in storage for 15 years
    03 SRT-4 12.24 Mom's
    07 Charger 5.7L 12.48 Dad's

  4. #1264
    Hybrid booster
    Join Date
    Feb 2007
    Location
    Memphis, TN
    Posts
    597

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by cordes View Post
    The FSM shows the proper part being C-6371. However that does not turn up any good results on google.

    C-4660 is the one for the 525 which shows what the 523/568 one should look like. I wonder if it would even work with the larger bearing?

    http://cgi.ebay.com/ebaymotors/ws/eB...4#ht_832wt_939
    Lucky me had access to the right Miller tools. You might have to do a little grinding on the bottom of the fingers to clear the case to use this. Flip the fingers around and it will grab the race. Patience, patience.


  5. #1265
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    ^^^ I got something Chi-milar

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  6. #1266
    Hybrid booster
    Join Date
    Feb 2007
    Location
    Memphis, TN
    Posts
    597

    Re: BadAss SRT-Z Update!!!

    Were both the large and the small snap rings on the big bearing in the bearing retainer plate? The large snap ring keeps the bearing from walking in the bearing retainer plate and the small snap ring keeps the shaft from walking on the bearing.

    John

  7. #1267
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Yes they were both on there...

    Was able to salvage a black slinger thungy out of a junk 555 case
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	100_7368.jpg 
Views:	83 
Size:	320.9 KB 
ID:	25191   Click image for larger version. 

Name:	100_7370.jpg 
Views:	72 
Size:	479.3 KB 
ID:	25192   Click image for larger version. 

Name:	100_7371.jpg 
Views:	87 
Size:	413.3 KB 
ID:	25193   Click image for larger version. 

Name:	100_7372.jpg 
Views:	77 
Size:	390.8 KB 
ID:	25194   Click image for larger version. 

Name:	100_7350.jpg 
Views:	79 
Size:	330.1 KB 
ID:	25195  

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  8. #1268
    boostaholic
    Join Date
    Feb 2007
    Location
    Illinois
    Posts
    1,184

    Re: BadAss SRT-Z Update!!!

    Trannies and balls and shafts, oh my!

    When do you think you'll have it back up and running?

  9. #1269
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Hoping to get it back together and hit the Grove on Labor Day... Club outing?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  10. #1270
    boostaholic
    Join Date
    Jul 2009
    Location
    Quad Cities, IA
    Posts
    1,069

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by BadAssPerformance View Post
    Hoping to get it back together and hit the Grove on Labor Day... Club outing?
    im in...... i should have the car too

  11. #1271
    Hybrid booster
    Join Date
    Feb 2007
    Location
    Memphis, TN
    Posts
    597

    Re: BadAss SRT-Z Update!!!

    Do you think the bearing was failing and letting the shaft move radially causing the plastic thingy to be destroyed, or was it just the inner race moving outward off the shaft causing the damage?

    Is the outer snap ring groove still at the same height as the other snap ring groove in the bearing housing?

  12. #1272
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Pretty sure the inner race sliding off the shaft killed the plastic slinger. Not sure on the snap ring grooves, I'll tear into it today

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  13. #1273
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Realized I had to take the trans out to get the inner bearing out past the diff/ring gear so I did that. BTW, Posted a coupel pics... for safety, I highly recommend getting one of these engine support beams.

    I also started working on getting the bearing out... the race that came off the shaft started digging into the case a little and is up against it... think I gotta make a little shoe to wedge under it to pop it out.. its not coming out of the rollers by itself. and tips?

    Got a bearing kit that came with almost all of the parts needed, no 1-2 shift fork pads and the WRONG intermediate shaft slinger.. it came with the green one instead of the black (sometimes grey) one.... posted pics of the differences.

    Also a pic of the gold bar for the new 3-4 pads...
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	100_7703.jpg 
Views:	89 
Size:	295.0 KB 
ID:	25247   Click image for larger version. 

Name:	100_7705.jpg 
Views:	85 
Size:	435.0 KB 
ID:	25248   Click image for larger version. 

Name:	100_7662.jpg 
Views:	90 
Size:	276.6 KB 
ID:	25249   Click image for larger version. 

Name:	100_7663.jpg 
Views:	96 
Size:	338.8 KB 
ID:	25250   Click image for larger version. 

Name:	100_7700.jpg 
Views:	84 
Size:	375.2 KB 
ID:	25251   Click image for larger version. 

Name:	100_7701.jpg 
Views:	76 
Size:	472.2 KB 
ID:	25252  

    Click image for larger version. 

Name:	100_7702.jpg 
Views:	80 
Size:	466.3 KB 
ID:	25253   Click image for larger version. 

Name:	100_7694.jpg 
Views:	205 
Size:	256.3 KB 
ID:	25254  

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  14. #1274
    Supporting Member II Turbo Mopar Contributor Shadow's Avatar
    Join Date
    Dec 2006
    Location
    Aubigny, Manitoba, Canada
    Posts
    5,088

    Re: BadAss SRT-Z Update!!!

    We should really have a stickied thread in the trans section on all of the right and available parts for our 5-spd trannies. How much was that kit, if you don't mind me asking?

    Robert Mclellan
    http://www.youtube.com/watch?v=wambNdfnu5M
    10.04 @ 143.28mph (144.82 highest mph)
    Worlds fastest 8v MTX Shelby Charger
    Manitoba's Fastest 4cyl!
    8 valve, No Nitrous!
    New clutch combo is the SH!T!

  15. #1275
    Bad Mother Flecker Turbo Mopar Staff fleckster's Avatar
    Join Date
    Dec 2005
    Location
    Arcadia, IN (just N of Indy)
    Posts
    2,607

    Re: BadAss SRT-Z Update!!!

    Do we need something more than this:

    http://www.turbo-mopar.com/forums/vb...&articleid=134

    John M. Fleck

    '83 Dodge Rampage 2.2 w/ 2.5L Turbo 14.79@94
    '87 Shelby Lancer #213 14.99@94
    '89 Chrysler LeBaron GT Turbo 'vert 15.88@92
    '92 Dodge Spirit R/T 13.50@104 ; 13.34@102 on slicks
    '98 Dodge Neon R/T 15.66@89
    '03 Dodge SRT-4 13.91@98

  16. #1276
    ...on your color TV screen... Turbo Mopar Contributor Reeves's Avatar
    Join Date
    Jan 2006
    Location
    Kentucky
    Posts
    4,860

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by BadAssPerformance View Post
    Realized I had to take the trans out to get the inner bearing out past the diff/ring gear so I did that. BTW, Posted a coupel pics... for safety, I highly recommend getting one of these engine support beams.
    What FD you running? I know with a 3.05FD that the bearing clears the ring gear no problem, and I think that it also clears the 3.50FD.

    I've seen that cross beam before. Looks pretty nice in use. Might have to get me one some day!

    James Reeves - Reeves Racing
    World's Fastest 8 Valve - 146.88 mph
    86 GLH-T 9.99 at 143.78 mph
    86 GLHS #169 Mom's - complete Super 60 car
    87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
    88 Shelby Z 13.5 - been in storage for 15 years
    03 SRT-4 12.24 Mom's
    07 Charger 5.7L 12.48 Dad's

  17. #1277
    Supporting Member II Turbo Mopar Contributor Shadow's Avatar
    Join Date
    Dec 2006
    Location
    Aubigny, Manitoba, Canada
    Posts
    5,088

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by fleckster View Post
    Do we need something more than this:

    http://www.turbo-mopar.com/forums/vb...&articleid=134
    See now that's my problem. I go look in the tranny section for stuff like that and don't even think of the KC.

    I'll have to read through it, looks pretty good. Are most of those parts still available?

    Robert Mclellan
    http://www.youtube.com/watch?v=wambNdfnu5M
    10.04 @ 143.28mph (144.82 highest mph)
    Worlds fastest 8v MTX Shelby Charger
    Manitoba's Fastest 4cyl!
    8 valve, No Nitrous!
    New clutch combo is the SH!T!

  18. #1278
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by Reeves View Post
    What FD you running? I know with a 3.05FD that the bearing clears the ring gear no problem, and I think that it also clears the 3.50FD.

    I've seen that cross beam before. Looks pretty nice in use. Might have to get me one some day!
    3.50 from... maybe this is a 520/555 to 523/568 case difference?



    Bearing set was like $250 shipped? I plan to call them and ask about the missing and mixed parts.

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  19. #1279
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss SRT-Z Update!!!

    ...so, any hot tips how to get that damn inner race out?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  20. #1280
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: BadAss SRT-Z Update!!!

    Quote Originally Posted by BadAssPerformance View Post
    ...so, any hot tips how to get that damn inner race out?
    ETA: RIF. Could you heat up the case until the race and all falls out?

Similar Threads

  1. BadAss SRT-Z Update!!!
    By BadAssPerformance in forum Project Log
    Replies: 1871
    Last Post: 09-18-2011, 08:39 PM
  2. 2.4L / A568 combo with SRT-4 Clutch - KC article feeder info
    By BadAssPerformance in forum Transmission
    Replies: 3
    Last Post: 04-25-2011, 01:17 PM
  3. A555 and A568 Quaife - the latest update/news
    By Austrian Dodge in forum Turbos Unleashed
    Replies: 5
    Last Post: 09-22-2009, 01:35 PM
  4. BadAss 2.4L Neon or BadAss 2.4L Z ???
    By BadAssPerformance in forum Custom Turbo Mopars
    Replies: 47
    Last Post: 02-04-2009, 10:16 PM
  5. SDAC 16/SRT Nationals Payment update
    By speeddemon in forum SDAC Events
    Replies: 9
    Last Post: 01-30-2006, 12:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •