JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
...car feels a couple pounds lighter today
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
LOL, its been a shitty day!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Fiberglass hood?
James Reeves - Reeves Racing
World's Fastest 8 Valve - 146.88 mph
86 GLH-T 9.99 at 143.78 mph
86 GLHS #169 Mom's - complete Super 60 car
87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
88 Shelby Z 13.5 - been in storage for 15 years
03 SRT-4 12.24 Mom's
07 Charger 5.7L 12.48 Dad's
Mike Marra
1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
Project Log:
http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=
carbon fiber front end and doors?
way off, im telling you, JT just went on a diet.... alot has changed in a year, just wait a few more days, it will all become soooooo clear at SDAC
Right
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Interested to see how the 26's effect driveline health. Hondas are usually afraid to run them because it runs up the cost to compete as few can afford all the repairs. That said our 60's all seem very weak in comparison on similar size tires. I know they all run 13" rims like Reeves and I don't really like the idea of fitment on 13" rims for a non L body.
I didn't have problems with 15" rims and 24.5's @ 8 psi but those were M/T's. Our track guys might just be used to the flat slicks. Only random people walking through the pits talking to car owners seemed worried. I think I broke an axle every time I can vividly remember running 8 psi in the tires.
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Our 60's are weak cuz our cars weigh wice as much as a civic, at least mine does.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Results from SDAC-22 Drag Day
Changes since the last time out...
-30lb lighter hood, thanks 22sehlby!
-RTV'ed the cam sensor to try to keep oil out
Run #1 - Right off the trailer, cold tires @ ~11psi, moderate burnout (was too far in water so not too hot), 2-step, spin in 1st then hook, granny shifted, no cut out! felt decent, new PB!
R/T: 0.314
60': 1.7050
330': 4.6569
1/8ET: 6.9678
1/8mph: 108.74
1000'ET: 8.9131
1000'mph: 127.04
1/4ET: 10.5638
1/4mph: 136.85
Run #2 - Broke reverse backing up to line up with the groove
Comments...
Too bad it broke, the one and only run made it the 2nd fastest car behind Slowes BSX
Reverse had been chattering ever since the twin disk went in... if its a quick fix, will race again soon... if broke bad, gonna build another trans
Glad the forward gears still work and was able to drive onto the trailer, LOL
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Will be awaiting the carnage shots
That's funny, I remember mentioning to you at the car show that I thought I heard you went a .50 something! HA!
That's the first time I've heard of reverse breaking!
It appears that the bearing backup plate bolt to the left of the input shaft (looking at the end of trans) worked itself out (aluminum threads came with it) and allowed the input shaft to push back causing less engagement (maybe 50%) between the reverse gear and input shaft. Pics to come
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.