AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
im kicking myself in a-- for recording over the BA run that last pass. like the Big Shwag says "that thing was on a pass". in the vid. someone had said " what the hell is that thing" my reply was "just watch my friend". just as i say that JT crackes off a "pop" like a shotgun at that 1st-2nd gear shift and rips down a 11.22 pass.
and if im not mistakin u ran a 91 nissan sentra sr20 w/ a 30r, tial wg on a set of slicks? cliped his nuts clean off. that was the same nissan that ran me down putin down a 12.58.
Pics...
bent bogart... popped M&H ... new M&H's ... fixed Bogart ... mounted up!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Nice.
Oh yeah, forgot this one.. cannot go smaller than 15" rims on the Z.. yes, the oil pan did touch the ground while braking from 125mph
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
That rim looks nice after they fixed it. Did you send it back to Bogart or somewhere else?
Sent to Bogart... they said they could straighten it, but for an extra day and some more money, I decided it was best to put a whole new outer on.
And now I have an aluminum aerobee frisbee!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Are the slicks in the pic the new ones?
Bryan
86 GLHS #161, 2016 Impala
SDAC National Member, SDAC Buckeye Chapter Member
A man has got to know his limitations.....
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
It's cool that they just cut off the old lip and put the new one on.
Good luck tomorrow.
Yeah, very cool. They plasma off the ring then mill the rest off.. the 2 pieces are glued together where they meet so milling is quicker than trying to cut the glue. Im, just thrilled they could fix it and turn it around quick.
Thanks!
DEFINITELY!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
nice times JT. It's a good day at the track when you and the car head back home in one piece. I've seen cars roll over when a slick blows out.
you guys got to start posting your times in the Events,racing & results.
good luck tomorrow.
So how'd you do? The air is good wish it would stop raining. Want to get out one more time.
Dean Stillie
87 Shelby Z 2.4 Turbo 9.06@146.05
82 Rampage 2.4 Turbo 10.14@138.02
Well... it ran a bit better
Figured out how to adjust the boost controller - thanks for the link Skibbe!
Got the new Slicks mounted up - thanks again VntEs!
Run #1 - Right off the trailer, fresh 24.5x8.5" M&H's still had the nipples and chalk on them... ~20-22psi missed 3rd gear
R/T: .375
60': 1.697 (best 60' at this point! guess fresh tires were overdue?)
330': 4.831
1/8ET: 7.613
1/8mph: 91.15
1000'ET: 9.882
1/4ET: 11.778
1/4mph: 119.47
Run #2 - Upped the boost to ~25psi
R/T: .242
60': 1.679 (Best 60' ever for the Z)
330': 4.701
1/8ET: 7.178
1/8mph: 101.44 (New Best 1/8 mph at this point!)
1000'ET: 9.278
1/4ET: 11.057 (New Best ET at this point!)
1/4mph: 127.26
Run #3 - Upped the boost to ~29psi
R/T: -.024
60': 1.697
330': 4.740
1/8ET: 7.161
1/8mph: 103.93 (New Best 1/8 mph at this point!)
1000'ET: 9.223
1/4ET: 10.962 (New Best ET at this point!)
1/4mph: 130.32
Run #4 - Same everything as run #3
R/T: .307
60': 1.693
330': 4.668
1/8ET: 7.054
1/8mph: 104/80 (New Best 1/8 mph for the Z!)
1000'ET: 9.109
1/4ET: 10.844
1/4mph: 130.47 (Tied previous Best mph for the Z!)
BoooYaaa! 10's in a street car, full exhaust, most of an interior, even power windows, LOL!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.