No, just mean testing the setup.....and the input shaft. LOL
No, just mean testing the setup.....and the input shaft. LOL
James Reeves - Reeves Racing
World's Fastest 8 Valve - 146.88 mph
86 GLH-T 9.99 at 143.78 mph
86 GLHS #169 Mom's - complete Super 60 car
87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
88 Shelby Z 13.5 - been in storage for 15 years
03 SRT-4 12.24 Mom's
07 Charger 5.7L 12.48 Dad's
LOL, right
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
See you bought one...
I feel like I don't really have any fear of the input shaft breaking after seeing that picture. Hey, its just another reason I say the t850 is a terrible transmission. Anyone can make something out of nothing with a pile of money but is that even any fun at that point?
I think I would have just gone 3 puck for better shifts and more holding power. I don't think a multidisc non carbon clutch will help longevity any worse then a 3 puck single won't help. You will just way more clamp load then you need vs just more then you need. Multidisc carbon would be super super awesome.
Of course, the harder you are on the transmission, the more we can learn
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
LOL, yep, we're gonna learn some shtuff this year
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
So, what clutch did you buy?
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Twin Disk ACT
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Sweet,
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Hope so! LOL!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Do you have to do any case mods or is bolt an go?
Since he was already running an ACT set-up in there I would think it should be bolt and go...........no?
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!
i thought i had read somewhere that the twin disc clutch will hit the inside of the bellhousing where the casting makes allowances for the output shaft to the diff.
That may have been the twin disc set-ups that myself and Lengel are running? They needed some modding, but after the change was made to the lock-nuts holding down the diaphram to PP, even the SRT-4's had interference problems.
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!
I think so, IF the p-plate is the same size as the HD plate I've been running, which some pics of the SRT-4 twin disk look like, BUT some pics of the SRT-4 twin disk looks like a smaller OD plate which may be a direct A568 bolt in, pending clutch travel, of course... YES, there are contradictory pics out there, so I plan to fix that when it arrives tomorrow, LOL!
That depends on what you mean by "the twin disk clutch" as there appears to be several out there... Alan's or Reeves, or Rob/Lengel or ACT? LOL!
... ACT assured me it is the same height as their HD plate
The SRT's had problems with the one you got or the ACT?
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
The one I got. When it was given to Realtune to test they recomended lock nuts on the outside of the PP, as they were just lock tighted bolts running from the inside of the plate and flush to the outside on the pre-production units.
Now the pre-production had already passed several tests including 20000 street miles on a fairly stock SRT-4 and several 700+WHP dyno pulls on Kevin Warrens race SRT-4.
I can only surmise that when they swapped in longer bolts and ran them through the PP with lock-nuts on the outside that no one took the time to dble check the clearances. ppl were in such a hurry to get their clutches (I remember the thread where several ppl were getting very inpatient) that I think they were trying to keep ppl happy when they really needed just a little more time to work everything out.
All that was needed was some slight countersinking and shaving the nuts (I can already hear you guys in the background! lol) which is exactly what Lengel did to both his and my set-ups and presto! No more problems!
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!
James Reeves - Reeves Racing
World's Fastest 8 Valve - 146.88 mph
86 GLH-T 9.99 at 143.78 mph
86 GLHS #169 Mom's - complete Super 60 car
87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
88 Shelby Z 13.5 - been in storage for 15 years
03 SRT-4 12.24 Mom's
07 Charger 5.7L 12.48 Dad's
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!
James Reeves - Reeves Racing
World's Fastest 8 Valve - 146.88 mph
86 GLH-T 9.99 at 143.78 mph
86 GLHS #169 Mom's - complete Super 60 car
87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
88 Shelby Z 13.5 - been in storage for 15 years
03 SRT-4 12.24 Mom's
07 Charger 5.7L 12.48 Dad's
Slip of the tongue bro! I ALMOST put it in last fall before the last wknd BUT some wise person convinced me NOT to change ANYTHING the way the car was going. (ended up being very Good advise!)
Add to that the fact that I didn't have time to do a proper break-in and that was that.
I'm fully looking forward to the twin as I'm pretty sure it will be even nicer to drive than the single I'm running now, but it will just have to wait a little bit longer.......
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.