Exterior window felt/trim for 87 Daytonas still available?

[Clay]

I know these are impossible to find for L-bodies, but are they available for an 87 daytona? this is the felt/rubber seal that goes up against the outside of the window. One side on my daytona is shot.

thanks,
clay

[mwrenn]

Try www.arizonaparts.com, they have an online parts list if you have the number of your trim. I was able to locate three of the four trim parts for my lancer on their site. Haven't tried calling and ordering yet though. Hope this helps.

Mike

[spoolinhard]

I have found them in j-yards on newer tonas in great shape.

[Clay]

do all of the daytonas use the same piece??

[rich tideswell]

yes, the window felts should be the same (hell they used almost the same door the entire legnth of time the car was produced)

i wouldn't at all be shocked that the felts are common amungst the lebarons, shadows, spirits, accliams....etc.......

[JeremyL]

I got new felts from the dealer about a year & a half a go or so. One was in Dallas, and the other came from someplace up north. I just cut the little notch one one end since my car has t-tops, and they worked perfectly.

[mcsvt]

Yup all the same size besides the t-tops as Jeremy mentioned. JDAWG could probably tell you if any are still sitting on the selves anywhere.

[Clay]

on the phone with the local dealer as i type this

[Clay]

well, the part number is 4198670. Its NS1, and no dealers on the network show any in stock.

SOOOOOO Im back to looking for a decent/good used one.

thanks,
clay

[spoolinhard]

well, the part number is 4198670. Its NS1, and no dealers on the network show any in stock.

SOOOOOO Im back to looking for a decent/good used one.

thanks,
clay

I more than likely have a set, I will check this weekend
-Kaleb

[mwrenn]

AZparts shows 9 in stock, $75 each though. OUCH!!

[Clay]

I more than likely have a set, I will check this weekend
-Kaleb

that would be great!

[Clay]

AZparts shows 9 in stock, $75 each though. OUCH!!

I found another place that says the have them in stock for a LOT less. Im waiting on their reply, and another.

[rich tideswell]

have you tried glueing some new felt onto your old pads? kinda a ghetto fix, but its better that scraping the window up

[Turbodave]

Clay the ones on the 88 Daytona I've got are nice, if you want them let me know.

[mwrenn]

I found another place that says the have them in stock for a LOT less. Im waiting on their reply, and another.

Yeah, I thought that was pretty high. Moparpartsamerica.com has them for $53. Much better!

Mike

[Clay]

Yeah, I thought that was pretty high. Moparpartsamerica.com has them for $53. Much better!

Mike

but they cant get them. They are NS1, and so I emailed moparpartsamerica.com to see if they had some..... no dice.

[mwrenn]

That sucks! Did you find another source for them? I'm trying to get a belt molding for the right rear door of my Lancer.

[Clay]

I found a used set.

[mwrenn]

Cool, thanks!

Mike