I need atleast 2 turbo 2.5 pistons in STD bore, but will buy more. Factory pistons only please, no aftermarket. Must be in good shape with minimal wear and scuffing on the skirt. Also looking for a set of rings, but I know I'll probably have to buy from a vendor but just asking while I'm here asking about pistons. PM or post here, don't care. Price shipped to 17025, thanks.
I've got some for ya!
How many do you need?
I can better other offers as I can take them to work, clean the pistons and pins professionally, and check the pin clearances for you along with re-condition the pins/piston pin bores.
Originally Posted by 22mopar
Steve
'90 VNT competition package Shadow - T-III SC6262 conversion/restoration
'91 Spirit R/T - white
'91 Spirit R/T - white
'92 IROC R/T - red
'67 Barracuda 273 now, 440/727 awaits....
I've got one good one. $30 shipped.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
PM sent to Direct Connection. Simon I would like more than 1. I was looking at FWD-P and they have cleaned up T1 2.5 pistons for $15 each, since I need to order a headgasket and rings anyway I might get from them depending on steve's price. Thanks
Thats fine,
Shipping is around $15, damn border, lol!
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Yeah, thats ok. Thanks Simon
Matt, ive got 4, just need cleaned up. came from running motor i had in the tona a while back.
shoot me an offer.
I have 3 almost new (read less than 10k on them) pistons and 4 used pistons, all w/ rings installed on them. All are 2.5 T1 CB pistons. $20 each for the used ones, $25 each for the low-mileage ones. $10 shipping regardless of how many you buy.
Force fed I'm very interested. On the ones with less than 10K are they Mahle pistons? What rings were installed? Fed mogul, hastings, clevite, or other?
You can have mine for the price of shipping. I'm pretty sure I have a set of 3 standard 2.5 OEM (Mahle) pistons with rings. The came out of a ~90k mile minivan engine, so they'll need to be cleaned and likely need new rings. With pins, too.
Can't match that price.
Steve
'90 VNT competition package Shadow - T-III SC6262 conversion/restoration
'91 Spirit R/T - white
'91 Spirit R/T - white
'92 IROC R/T - red
'67 Barracuda 273 now, 440/727 awaits....
I will keep you in mind Rob, but I'm interested in force fed's 10K mile pistons right now.
Not sure what rings, I kinda assume they are probably SP's, but I'll see if I can find out. I got them from another guy, he told me they were new, but they have been obviously used. They are very clean though, just a bit black on top, skirts and undersides like new, this is why I say they have 10k or less, anymore than that and I would assume they'd be a lot dirtier.
Here, I found a pic of one:
The guy doesn't remember what rings they were, so it's anybody's guess
Are they Mahle pistons though? Or some aftermarket piston?
They look factory, are there any identifying marks on Mahles?
They look exactly the same as the other ''used'' ones you have? Take a look underneath the piston there should be something usually underneath the pin or even a letter somewhere.
Matt,
I have a set of 4 used Mahle 2.5 piston and pins left over from my engine build. They have been media blasted and ready to go. No rings though....
What have you got for trade bait??
Troy
Just looked, they are Mahle pistons, says Mahle on the underside and has the Chrysler emblem on them too.
Reply With Quote
