i've searched and read as much as i can on the topic, and still no luck. i'm sure by fixing one i'll fix the other. but so far, i can't get the fuel pump to prime, and there is no spark when cranking. worked fine before fixing a small water leak near the thermostat housing. no water leaked anywhere it shouldn't have.
what i've tried so far:
- installed known good fuel pump
- cleaned power module connectors
- tried a known good power module
- tested all fusable links (there is power to all on the firewall side)
- checked all fuses underdash (for S&G's)
- tested ingition voltage (good)
- there is no pwr to either of the small connectors on the coil
- wiggled/cleaned Logic Module connectors
- different HEP
- Tried a known good Logic Module.
- Tried a known good LM with the known good PM
what am i missing?? i think i covered all the bases so far yet still no fuel pump. there has to be something small that i am missing. it's seems so juvenile, but like i said, i've tried just about everything i think.
thanks in advance
-Kurt