Results 1 to 13 of 13

Thread: How to install a 2 gauge pod in a 1st Gen Minivan.

  1. #1
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Talking How to install a 2 gauge pod in a 1st Gen Minivan.

    Buy a Sunpro Universal guage pod, use the internet to find one, if in Canada, Canadian Tire has them as thats where I bought mine. Grab a spare trim piece so as not to wreck your original. Mark where you want it, grab the heat gun and start heating, took me about 1/2 hour, 6 screws and its magic.





    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  2. #2
    boostaholic
    Join Date
    Dec 2005
    Location
    South Side Indy
    Posts
    1,221

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    Do you like your EGT gauge upside-down?

  3. #3
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    Quote Originally Posted by 3Bar_Mopar
    Do you like your EGT gauge upside-down?

    Wow, if I had a dollar for everyone that asked that. I have it set so 1600 f is straight up, now when I glance at my guages, if I see the needle at 12 oclock, its time to back off, or becareful,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  4. #4
    turbo addict Turbo Mopar Contributor Dave's Avatar
    Join Date
    Dec 2005
    Location
    Canton, Ohio
    Posts
    3,305

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    Quote Originally Posted by turbovanman
    Wow, if I had a dollar for everyone that asked that. I have it set so 1600 f is straight up, now when I glance at my guages, if I see the needle at 12 oclock, its time to back off, or becareful,
    You a smart boy, Simon!

  5. #5
    boostaholic
    Join Date
    Dec 2005
    Location
    South Side Indy
    Posts
    1,221

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    Quote Originally Posted by turbovanman
    Wow, if I had a dollar for everyone that asked that. I have it set so 1600 f is straight up, now when I glance at my guages, if I see the needle at 12 oclock, its time to back off, or becareful,

    Pretty smart....just looked crazy to the untrained eye, ya know?

  6. #6
    turbo addict
    Join Date
    Feb 2006
    Location
    Richmond, VA
    Posts
    1,527

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    Does that fit 2 5/8" guages?

  7. #7
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    If thats the smaller ones, yes, if not, no,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  8. #8
    Garrett booster
    Join Date
    Dec 2005
    Location
    Royal Oak, MI
    Posts
    151

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    It different seeing 180 on a minivan speedometer!

    -Chuck James

  9. #9
    Mitsu booster
    Join Date
    Jan 2006
    Location
    Richmond, VA
    Posts
    17

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    I think the smaller guages are 2 1/16, for what it's worth. Nice install, Simon!

  10. #10
    Mitsu booster
    Join Date
    Dec 2005
    Location
    Mechanicsburg, PA 17050
    Posts
    16

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    how is the angle when driving? how tall are you, seat whole way back?

  11. #11
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    Quote Originally Posted by myplasticegg
    how is the angle when driving? how tall are you, seat whole way back?
    Easily seen, I am 5'10", seat all the way back.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  12. #12
    Mitsu booster
    Join Date
    Mar 2006
    Location
    20 miles west of Boston, Ma
    Posts
    14

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    Quote Originally Posted by turbovanman
    Wow, if I had a dollar for everyone that asked that. I have it set so 1600 f is straight up,
    Reading and lookin at your pics, I was betting that would be the first question asked, in the first post after yours.

    Ooooold drag racer thing there, my guages look so flarked up in my old tubbed firebird, people would make me nuts 'fixing them for me' Only for me to abort the next run thinking my nitrous pressure is up at 2400 or that the EGTs are either 1900 or 250, both of which we know wouldnt run. But, as you are pulling 2.35 Gs, and hitting almost 150-155 at half track, you aint 'looking' at the guages, you check em real quick, anything but almost straight up, you bail the throttle, or loose another $1200 on slugs, and $900 on valve springs, and pray she stays together.


    Man, I got to put the ol 85 Firebird back together, got almost all the parts needed for more 8 sec passes.

  13. #13
    ...on your color TV screen... Turbo Mopar Contributor Reeves's Avatar
    Join Date
    Jan 2006
    Location
    Kentucky
    Posts
    4,860

    Re: How to install a 2 gauge pod in a 1st Gen Minivan.

    Looks pretty good! I have my OMNI pod installed in my van right now, but I may get the kind you got....I like the better coverage!

    James Reeves - Reeves Racing
    World's Fastest 8 Valve - 146.88 mph
    86 GLH-T 9.99 at 143.78 mph
    86 GLHS #169 Mom's - complete Super 60 car
    87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
    88 Shelby Z 13.5 - been in storage for 15 years
    03 SRT-4 12.24 Mom's
    07 Charger 5.7L 12.48 Dad's

Similar Threads

  1. A Ton of parts FOR SALE
    By layapatch in forum Parts For Sale
    Replies: 17
    Last Post: 10-23-2007, 11:43 PM
  2. Autometer Cobalt EGT gauge install: HELP
    By shelbyplaya in forum Electrical & Fuel System
    Replies: 26
    Last Post: 05-29-2007, 11:12 PM
  3. Auto Meter Air / Fuel Gauge Pro Comp Ultra Lite 2 1/6"
    By Fast4Ward in forum Parts For Sale
    Replies: 0
    Last Post: 01-06-2006, 11:08 PM
  4. Cyberdyne Digital Fuel Pressure Gauge 2 1/6"
    By Fast4Ward in forum Parts For Sale
    Replies: 0
    Last Post: 01-06-2006, 11:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •