Best front mount intercooler for 91 LeBaron

[csx452]

Just wondering what intercooler would be best to use for a front mount on a 91 LeBaron 2.5 T-1. Has anyone done this, and if so, do you have any pics?
Thanks in advance

[Murphy]

check out my thread...deciding on a FMIC(front mount intercooler)

and in the fabrication section theres a show off your IC thread

[Russ Jerome]

Wish I still had pics of the white barron and its Spearco.
With the center support nixxed the huge Spearco's sold
on our vendor's site's (both out/inlets on same side) fall
in easily. The outlets of the NPR's will require more plumbing
than the Spearco's with the same side outlets.


GO BIG!

[firebaron90]

Here ya go Russ, here is my 90 Lebaron....It did go in easy with a little hammer work on the diaginal support. Hopefully it will like my Daytona as well.

[ssheen]

that makes the one in my Daytona look like a baby!!

[Whorse]

I've got a cheap used IC from a 10v Audi in my car, and it's been better than stock, and pretty easy to set up with some 2" IC piping, but I wouldn't recommend it for much more than a temporary fix, as there is much better out there.

I'm hoping to do an SRT4 IC in my car sometime this spring, so I'll post pictures if I get that done anytime soon.

[csx452]

Thanks, but I found a brand new radiator and intercooler in my stash of parts from a VNT that will more or less bolt right in with just a couple of spacers. I'll have to figure a way to mount the air conditioning condensor and then come up with some way to plumb it, but it should be OK.
Frank H.