Just wondering what intercooler would be best to use for a front mount on a 91 LeBaron 2.5 T-1. Has anyone done this, and if so, do you have any pics?
Thanks in advance
Just wondering what intercooler would be best to use for a front mount on a 91 LeBaron 2.5 T-1. Has anyone done this, and if so, do you have any pics?
Thanks in advance
check out my thread...deciding on a FMIC(front mount intercooler)
and in the fabrication section theres a show off your IC thread
95 spirit 3.0/543 15.0@91 N/A, 14.5@96 on a 50 shot RIP 87 shelby Z - project car, maybe I can drive it this year 91 spirit - roll it, chop the top, do some burnouts! RIP
Wish I still had pics of the white barron and its Spearco.
With the center support nixxed the huge Spearco's sold
on our vendor's site's (both out/inlets on same side) fall
in easily. The outlets of the NPR's will require more plumbing
than the Spearco's with the same side outlets.
GO BIG!
Here ya go Russ, here is my 90 Lebaron....It did go in easy with a little hammer work on the diaginal support. Hopefully it will like my Daytona as well.
that makes the one in my Daytona look like a baby!!
I've got a cheap used IC from a 10v Audi in my car, and it's been better than stock, and pretty easy to set up with some 2" IC piping, but I wouldn't recommend it for much more than a temporary fix, as there is much better out there.
I'm hoping to do an SRT4 IC in my car sometime this spring, so I'll post pictures if I get that done anytime soon.
Thanks, but I found a brand new radiator and intercooler in my stash of parts from a VNT that will more or less bolt right in with just a couple of spacers. I'll have to figure a way to mount the air conditioning condensor and then come up with some way to plumb it, but it should be OK.
Frank H.