Blue 87 Shelby Z Daytona-parting out car.

[looneytuner]

Duct tape a stick on top line of fender with 1/2' sticking out front and rear. I had two tc fenders shipped one at a time. First one was bent at windshield. No way to get original strength back in that area if it's bent. Second was dinged at front edge. The second one was packed with so much bubble wrap, it took 1/2 hour with box cutter to get it all off.

[Mackdog]

Thanks Turbovanman for all your help with the wheel and molding but the wheel is in worse shape than mine. I will check out my door sill today and see if yours is in better shape. Mackdog

[turbovanman²]

No problem. Glad I got my new camera for Xmas, takes wicked pics.

[TurboXT]

Drove it around, it runs not bad, turbo doesn't smoke and builds boost, clutch feels good.

so why part it out.

[turbovanman²]

See above responses.

[Bossman429]

Simon, have you found out anything on the crab wheels?
I think as long as they have 225/50 tires on them they should be 6.5 wide, 6 wide *should* have 205/60s.
I really want to ditch my lace wheels on the GTS.

[turbovanman²]

Wow, I love lace wheels-trade? Not yet, haven't measured them and it has skinny tires that look like they need wider wheels.

[Lee'sdaytona]

Hmm...87 should have had the 'automatic' seat belts.....only the T-tops had normal seat belts and I beleive daytonas after 1989....weird....
-Lee

[supercrackerbox]

There *should* be a casting mark on the inside of the wheel that will determine whether it's a 6" or 6.5". It's a good idea to check as they can tend to get mixed up over the years, which is why I have 1 6" among my stacks of 6.5".

[WrkInPrgrSS]

What condition are the brake calipers in and how much? I'm looking for at least the rears, maybe all 4 for my 87 Z.

[stevee32]

You Have Pm

[blk86trbo]

Wow...just looked at this thread for the first time...that Daytona makes the ones that I've saved look like dooky! A new carpet and that interior would look nice!

Too bad you have to part it, but it's understandable. Good luck.

To keep it on topic, I've bought parts from Simon before, and things went smoothly.

Paul

[turbovanman²]

Thanks for the kudo's. I am trying to catch up guys, please be patient.