Results 1 to 8 of 8

Thread: Turbo For Sale

  1. #1
    Authorized Vendor Turbo Mopar Vendor BadFastGTC's Avatar
    Join Date
    Dec 2005
    Posts
    652

    Turbo For Sale

    This turbo was on Sledgehammer for some time before I swapped over to the newer one. The compressor side of the thing has an "H" trim wheel in it, determined from all the measurements I took. Stock compressor housing. The turbine side has a stock wheel and a .63 housing with 2.5" swing valve, with heli-coils installed. There is also a large waste gate can on it, but it is weak. Turbo operates fine. I'll guarantee it. $400.00 plus shipping.

    I'd suggest using this on a stick car. I had it on my S/L for a short time, but I didn't like how it spooled. I do have to add that I feel the lousy converter I had in the car at that time impacted the turbo performance, but I needed to clarify that.

    Turbo will come from Brownstown, Pa.

  2. #2
    Hot Certified Christians at TD! Turbo Mopar Staff Directconnection's Avatar
    Join Date
    Dec 2005
    Location
    Nunya-Maine
    Posts
    6,027

    Re: Turbo For Sale

    Steve...how does this "H" trim compare to a S60 or 60 trim wheel? I have a friend that *may* be interested. How many miles would you say are on this turbo, also?

    Thanks,
    Steve

    ps..got offered a job in a highly reputable race engine builder shop 2 weeks ago. Really thinking about swapping trades

  3. #3
    Authorized Vendor Turbo Mopar Vendor BadFastGTC's Avatar
    Join Date
    Dec 2005
    Posts
    652

    Re: Turbo For Sale

    Steve,

    The "H" wheel is a TO4b rated at 49lb/min, but would be less in the stock housing. The wheel has a 2.75 exducer and a 2.20 (or so) inducer. The stock T-3 compressor inlet is machined out to it's limits obviously! The turbo can be called one of the many variations of a Super 70. My guess as to how many miles are on it would be in the 25 to 30K range,driving to and from the track and such!

    It would be tough to turn down a job like that Steve!

    Steve M.


    Quote Originally Posted by Directconnection
    Steve...how does this "H" trim compare to a S60 or 60 trim wheel? I have a friend that *may* be interested. How many miles would you say are on this turbo, also?

    Thanks,
    Steve

    ps..got offered a job in a highly reputable race engine builder shop 2 weeks ago. Really thinking about swapping trades

  4. #4
    Hot Certified Christians at TD! Turbo Mopar Staff Directconnection's Avatar
    Join Date
    Dec 2005
    Location
    Nunya-Maine
    Posts
    6,027

    Re: Turbo For Sale

    Well, being that nobody has offered yet... I'll ask my friend and see if he wants this. I guess since nobody has chimed in, I get 1st dibbs!

    Steve

  5. #5
    Authorized Vendor Turbo Mopar Vendor BadFastGTC's Avatar
    Join Date
    Dec 2005
    Posts
    652

    Re: Turbo For Sale

    Yes you do. Especially since I haven't posted it for sale elsewhere!

    Steve M.



    Quote Originally Posted by Directconnection
    Well, being that nobody has offered yet... I'll ask my friend and see if he wants this. I guess since nobody has chimed in, I get 1st dibbs!

    Steve

  6. #6
    turbo addict Captain Chaos's Avatar
    Join Date
    Dec 2005
    Location
    Jacksonville, Fl.
    Posts
    2,308

    Re: Turbo For Sale

    Pm Sent

  7. #7
    turbo addict
    Join Date
    Dec 2005
    Location
    White Rock/Surrey B.C.
    Posts
    1,578

    Re: Turbo For Sale

    Is this still for sale?

  8. #8
    Authorized Vendor Turbo Mopar Vendor BadFastGTC's Avatar
    Join Date
    Dec 2005
    Posts
    652

    Re: Turbo For Sale

    Why yes, it still is for sale!

Similar Threads

  1. Help! I've the slowest turbo Lebaron ('92 T1 manual) known to man!
    By thrashercharged in forum The Original "Turbo Dodge" Cars
    Replies: 44
    Last Post: 09-05-2008, 08:19 AM
  2. 1986 Chrysler Daytona Turbo Z C/S
    By CDNTurboZ in forum Cars
    Replies: 16
    Last Post: 12-10-2006, 07:00 PM
  3. Various Turbo I parts for sale
    By minigts in forum Parts For Sale
    Replies: 9
    Last Post: 02-21-2006, 02:46 PM
  4. Replies: 1
    Last Post: 02-10-2006, 01:23 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •