How exactly does a dual diaphram wastegate work? How do I hook it up? Do I need 2 manual boost controllers? Can I just hook 1 up and will it work like a normal wastegate? Any help would be appreciated. Thanks
How exactly does a dual diaphram wastegate work? How do I hook it up? Do I need 2 manual boost controllers? Can I just hook 1 up and will it work like a normal wastegate? Any help would be appreciated. Thanks
dual dia. rule
I've been trying to get more internal wastegate guys to switch to them
the port farther to the rod gets hooked directly to manifold
the port closer to the rod goes thru a manual boost controller (turbonetics, or a air press. regulator)
you can set the reg. to whatever press. you want your boost to be
when the manifold pressure is higher then the set press. it pushes the wastegate open
easy as that
Very reliable and consistant
If it has an adjustable wastegate rod
set it so when the hole in the rod is half way over the swingvalve in length
then pull the rod over the swingvalve (did that make sense?)
you'll love it
others have used graingers and such but.... not sure on it that way
With the dual port the engine vacuum will help close the wastegate faster right? Where can you find one of these?
Thats some darn good info right there and yeah, fuzzy on the rod adjustment,
I believe some year mitsu's had a dual wastegate can.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
It's similar to this one-
http://cgi.ebay.com/ebaymotors/Waste...spagenameZWDVW
So the advantages are they are more accurate and faster reacting?
''fuzzy on the rod adjustment, ''
Thats the part I understood! LOL. He means put some preload on it, the hole on the wastegate about 1/2 way over the post it attaches too and pull it onto it. Sounds like about 1/8''-1/4'' of preload.
Mine is adjustable. Thanks for the info everybody!
Yup it will.