-
What tools needed to pull motor
I have a clean turbo van at a yard close to me and i going to take everthing .Im new to turbo mopars so i need to know the tool need.Im going to cut all the wires and hoes.Stuff might be for sale and tell me what you need mabye i can pull it for you.Every thing is there almost.
-
Re: What tools needed to pull motor
Well tell you what I use.
Saws all for the exhuast or 13mm wrenches
WD40 or some other lubricant
10,13,15,18, and 21 mm wrenchs, sockets, and such.
Pry bars, flat and star screw drivers
Are you just yanking the whole thing out as one piece, including trans?
-
Rhymes with tortoise.
Turbo Mopar Staff
Re: What tools needed to pull motor
I would also include 8mm wrenches and sockets. I would not just cut up everything either. You could get decent cash for a complete good condition wiring harness, and it leaves it for the next guy who might need it.
-
Re: What tools needed to pull motor
Yea im going to pull it all together.Thanks for reminding me not to cut it up.Ive gone to the yard and found my parts all banged up so ill take my time
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules