Turbo, +40's, 3 bar and more

[overlordsshadow]

Long story short this Shadow is cursed so it is going back to stock before I end up selling it or even worse, putting it back to N/A spec. All prices in USD without shipping. Shipping from Regina Saskatchewan Canada S4T 5P4. Can negotiate

Parts with less than 3k:

3 bar map - $70
+40% injectors - $150
FWD performance stage 5 89 2.5L comp - $275

Other parts:
Mitsubishi Turbo (not the T304H) comes with header wrapped half stainless steal downpipe with a flex coupler to get it down just under the firewall on a shadow, super strong adjustable wastegate actuator, braided oil in line and, stock dodge oil return tube (perfect fit), and the compressor housing has had a 90 degree added to it to clear the head with a stock manifold. Some side to side shaft play. Stock air intake fits but the blades are much bigger and better. pics

Stock exhaust manifold, slightly ported with T3 pattern studs and a 5/8 npt tap for an egt gauge.

More parts listed at http://www.moparmen.ca/forsale.php

[badandy]

Is the 3 bar an actual GM 3 bar or a aftermarket unit?

[overlordsshadow]

GM/ac delco

[moparfwdsleeper]

PM Sent...

[Mike_Shepard]

any chance of you selling the adjustable wastegate?

[overlordsshadow]

Well now its looking like my bro wants to convince me to keep all this ---- since I've paid so much for it. Will let you know by friday what I am doing but the wastegate would probably go with the turbo.

[lancer117]

willing to trade the + 40's for a shelby vavle cover ?

[overlordsshadow]

Don't own a Shelby and not going to pretend that my Shadow is one.

[lancer117]

ok , well i did not ask you if your shadow was a shelby ! i just asked if you would like to trade .

[overlordsshadow]

Then I guess the answer would be no. Sorry for my initial reply then.

[Ken F]

hey, interested in both the +40's and the 3 bar should you choose to sell

[tryingbe]

Today is Friday, have you decided?

How much are you looking for the turbo and exhaust manifold?

[overlordsshadow]

Yep got a head all ready to go at just above free. Trying one more time, this time with a cometic. Hoping it works.

[overlordsshadow]

Well changed my mind. Need something reliable and cheaper so I'm going back to the land of under 14.7 psi. The 3 bar map, +40% injectors, stage 5 89 2.5L comp, and turbo are all back on the selling block. Have also some spare .020 over and .040 over wisecos but not full sets. Heavy duty rods in decent condition and a modded 2.5L oil pan for holding the oil down in the pan. Also up for sale now is an adjustable fidanza round tooth sproket, spare T1 intake with a charge temp sensor added and very mild porting. Many other spare parts if you need.

[project_86]

hey man interested in your 40's. 150$ shipped to bc or? what cal were you running in that bad boy and bhg just pushing you over the edge? what do you want for the adj. cam gear?

[badandy]

Well changed my mind. Need something reliable and cheaper so I'm going back to the land of under 14.7 psi. The 3 bar map, +40% injectors, stage 5 89 2.5L comp, and turbo are all back on the selling block. Have also some spare .020 over and .040 over wisecos but not full sets. Heavy duty rods in decent condition and a modded 2.5L oil pan for holding the oil down in the pan. Also up for sale now is an adjustable fidanza round tooth sproket, spare T1 intake with a charge temp sensor added and very mild porting. Many other spare parts if you need.

I had first dibs on the +40's if you look waaaaaaaay back in this thread. Please let me know!

Correction: it was through a PM

[shelby zed]

cam gear, how much?

[overlordsshadow]

+40%'s are gone. Pm'ed you shelby