What accessory brackets are peopel using on their 2.4 swaps?

The brackets that came on my PT engine don't line up well and weigh about 10lbs each! The stratus mounts seem to weigh about 1.5 lbs each.

I want all acesssories on mine in an lbody so it is a challenge....

I am currently looking at 2.4 stratus PS, Alternator, and AC brackets.

(I will add pictures in a day or two.)

The AC bracket doesn't attach perfectly because it must normally connect to an older style water pump housing or something. I drilled a new hole and now have 3 bolts holding it in.


The stratus also uses a 6 rib belt because it moves the alternator to the front and runs both the AC and alternator on the same belt.

Which engines place the alternator in which locations?

PT: Front PS, Back alternator
Stratus 2.4: Front alternator, Back PS

Does anyone know if the 2.0 and 2.4 crank pullies are compatible? If they are not then there doesn't seem to be a source for the stratus underdrive pully. If they are the same the Avenger pulley might work...

Thanks,

Rich