Results 1 to 5 of 5

Thread: 1989 Dodge Omni Drag Street Project

  1. #1
    Garrett booster
    Join Date
    Mar 2006
    Location
    PA
    Posts
    142

    1989 Dodge Omni Drag Street Project

    Up for sale is my 89 Omni project car. The car currently has the stock 2.2 TBI A413 in it. 53,XXX miles on the body. I tried parting it out here

    http://www.turbo-mopar.com/forums/sh...ad.php?t=15177

    Interior is gutted. Metal in the doors was cut out, but still able to use the door panels as well as both A pillar trim is with car. Still has a front seats and front belts for both sides. The stock dash is intact as well as the AC/ heater box. The car is solid except for some surface rust at the bottom of the doors, a bit on the quarter and bottom of the A pillars. The only hole is in the front drivers floor board. I'll have pics up in a few hours.


    Ported big valve 782 head.

    Lift
    .100 78
    .200 132
    .300 168
    .400 194
    .500 211
    .600 216
    .650 216
    .700 216
    .750 216

    High lift Comp springs, back cut valves. It was done by HP Engines out of Mifflintown PA.

    Ported 1 Piece Intake. Opened up for 52mm throttle body and port matched to the head.

    52mm throttle body.

    Eagle H-Beam rods from FWD Performacne.

    Wiseco .020 forged 2.5 pistons

    ARP Commonblock Main Studs

    ARP 11mm Head Studs

    Adjustable Cam Gear from FWD (round tooth)

    FWD Performance High RPM Lifters.

    FWD Perormance Roller Followers.

    Accufab Universal FPR.

    Treadstone FMIC- Overall 20x12.5x3.5, core 18.48x6x3.5 same side inlet outlet.

    ALL PARTS ABOVE ARE BRAND NEW. EXCEPT FOR INTAKE TB WHICH WAS OFF A YARD CAR.

    If you add up the prices from the other thread it comes to $3020.

    Also included now is

    1989 Omni

    1990 commonblock out of a N/A Shadow. Good std. crank. It WILL clean up at .020 It wasn't done until I was going to assemble the motor

    Good A413 trans out of an 87 Lebaron Turbo. Was good when the motor went, but obviously should be rebuilt with race parts for this setup.

    4 Crabs. Need new rubber and should be refinished as they are peeling.

    Autometer Sport comp 30 psi boost gauge, Autogauge oil pressure and water temp gauge. All new.


    $2700 FOR EVERYTHING.

    Thanks,
    Jon

  2. #2
    Garrett booster
    Join Date
    Mar 2006
    Location
    PA
    Posts
    142

    Re: 1989 Dodge Omni Drag Street Project

    Some pics.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	d 016.jpg 
Views:	155 
Size:	111.5 KB 
ID:	4837   Click image for larger version. 

Name:	d 017.jpg 
Views:	192 
Size:	111.0 KB 
ID:	4838   Click image for larger version. 

Name:	d 018.jpg 
Views:	153 
Size:	111.9 KB 
ID:	4839   Click image for larger version. 

Name:	d 019.jpg 
Views:	153 
Size:	106.6 KB 
ID:	4840   Click image for larger version. 

Name:	d 020.jpg 
Views:	148 
Size:	106.9 KB 
ID:	4841   Click image for larger version. 

Name:	d 021.jpg 
Views:	139 
Size:	107.9 KB 
ID:	4842  

    Click image for larger version. 

Name:	d 022.jpg 
Views:	140 
Size:	109.2 KB 
ID:	4843   Click image for larger version. 

Name:	d 024.jpg 
Views:	155 
Size:	109.0 KB 
ID:	4844  

  3. #3
    Garrett booster
    Join Date
    Mar 2006
    Location
    PA
    Posts
    142

    Re: 1989 Dodge Omni Drag Street Project

    Here are some more pics. Grille and bezels are included, grille has a few small cracks. All windows work. There is no rust in the spare tire well or back floor. It's just dirt. If you have any questions, please ask.
    Jon
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	d 023.jpg 
Views:	138 
Size:	100.6 KB 
ID:	4845   Click image for larger version. 

Name:	d 025.jpg 
Views:	136 
Size:	101.7 KB 
ID:	4846   Click image for larger version. 

Name:	d 026.jpg 
Views:	122 
Size:	98.4 KB 
ID:	4847   Click image for larger version. 

Name:	d 027.jpg 
Views:	128 
Size:	104.9 KB 
ID:	4848   Click image for larger version. 

Name:	d 029.jpg 
Views:	136 
Size:	102.0 KB 
ID:	4849   Click image for larger version. 

Name:	d 014.jpg 
Views:	122 
Size:	117.2 KB 
ID:	4850  

    Click image for larger version. 

Name:	d 030.jpg 
Views:	146 
Size:	103.6 KB 
ID:	4851   Click image for larger version. 

Name:	d 028.jpg 
Views:	148 
Size:	106.1 KB 
ID:	4852   Click image for larger version. 

Name:	d 031.jpg 
Views:	136 
Size:	111.9 KB 
ID:	4853  

  4. #4
    Garrett booster
    Join Date
    Mar 2006
    Location
    PA
    Posts
    142

    Re: 1989 Dodge Omni Drag Street Project

    $2400 Takes Everything!!!!!!!!

  5. #5
    Authorized Vendor Turbo Mopar Vendor mario03SRT's Avatar
    Join Date
    Feb 2006
    Location
    Cincinnati, Ohio
    Posts
    1,051

    Re: 1989 Dodge Omni Drag Street Project

    How much for the head?

    Send a PM if you are interested.

    Marion

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •