1/4" Turbonetics Threaded Adjustable Rod Ends

[Mario]

Length From end to end:58.6 MM
These are brand new.
Great if you want to make your current wastegate actuator rod adjustable.
I have plenty available

$7 Shipped.

[Blue Iroc R/T]

Length From end to end:58.6 MM
These are brand new.
Great if you want to make your current wastegate actuator rod adjustable.
I have plenty available

$7 Shipped.

What is you Paypal address? I'd like two of them.

[Blue Iroc R/T]

Paypal sent.

Thanks

[Mario]

Thanks. You should be receiving them mid-week.

[jaysshelby]

mario
send me a pic of this, i'm interested
my e-mail is jaysshlb@yahoo.com
also send me your paypal acc name.

[omnivore]

How would one go about putting this in place of the stock non adjustable one? Does the stock one thread out of the actuator can? Do your rod ends have a hole in the flapper door end to attach to the flapper's arm?

[Mario]

I'll post a picture tommorow morning. I really beat from today. The rod ends are simply that, the rod end. There is a hole for the wastegate flapper.

To use this on your stock wastegate actuator, you have to cut off your end, thread a short portion of the end using the die, and screw this on.

[Mario]

Picture:

[Blue Iroc R/T]

I got my Rod Ends today. Work great. Thanks a lot Mario.

[Mario]

No problem. Glad you like them.

[Mario]

to the top

[Mario]

Plenty left still...

[Mario]

bump.