Results 1 to 6 of 6

Thread: N/A to FI swap help needed

  1. #1
    Mitsu booster
    Join Date
    Jun 2007
    Location
    Olive Branch, MS
    Posts
    2

    N/A to FI swap help needed

    Hey guys, I am wanting to put a new heart in my 89 sundance. Is there a write up I am missing somewhere on the do's and dont of a swap like this? I will be going from a 2.2 na to a 2.2 turbo. Is the wiring/ axle/ ecu/ etc etc fairly straightforward or is it weird. Any help would be appreciated?

  2. #2
    turbo addict
    Join Date
    Feb 2007
    Location
    Regina Sask Canada
    Posts
    1,629

    Re: N/A to FI swap help needed

    I've done it and its pretty easy except for splicing a harness together if need be. Same axles are fine, ecu swap, if its an auto trans it will probly bake quick unless only running about 7 psi. Let me know if u need more info.

  3. #3
    Hybrid booster
    Join Date
    Jan 2007
    Location
    kelowna bc
    Posts
    647

    Re: N/A to FI swap help needed

    convert to manual and grab the harness from a donor car

  4. #4
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: N/A to FI swap help needed

    Get an 89 engine wiring harness and computer, turbo fuel pump, turbo trans if auto and complete engine minus alt and power steering.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  5. #5
    Mitsu booster
    Join Date
    Jun 2007
    Location
    Olive Branch, MS
    Posts
    2

    Re: N/A to FI swap help needed

    Thanks guys, i am really looking forward to this swap. This car deserves some love as she has served me well the last few years. I cant think of a much better "sleeper" for the ricers than this.....unless its a badazz minivan!

    Do i need to have a motor and ecu from an 89 or will other years work?
    I found an 88 shelby z daytona in the local upullit that is complete and only showing 61k on the odometer. Not sure why it is there other than the faded paint and mismatched front fender. I put a wrench on the crank pulley and she would spin so i am not sure whats the story on the car. and no they wont sell the whole car, which is a crime.

  6. #6
    turbo addict
    Join Date
    Feb 2007
    Location
    Regina Sask Canada
    Posts
    1,629

    Re: N/A to FI swap help needed

    It will work. I swapped an 88 T1 into my 92 shadow. Your swap may be easier. You need the computer for the wiring that the engine will use. So take the engine, trans, comp, and engine bay wiring from that car and put it in yours. I would be easier to find everything from a sundance RS or a Shadow though.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •