Convertor/Flexplate bolt sizes!

[powermaxx]

I need to get some ASAP!!!! Little details are going to kill me in converting my GLHS over to the A413. What size are the flexplate to crank and the Convertor to Flexplate bolts? (Stock size I assume, The convertor is from NAN I believe.)

Does ARP make a set? Or????



TIA

[shelby zed]

m10 x 1.0 thread pitch, i think the threaded part is about an inch long and if an auto parts store by you carries pioneer, they will have them

[Blue Iroc R/T]

C A U T I O N ! !
The Flex Plate/Crank bolts and the Flex Plate/Torque Converter bolts are the same thread size and about the same length (IIRC, the crank bolts are a little longer). HOWEVER; the head thickness on the Flex Plate/Torque Converter Bolts is THINNER.
IF you use the wrong ones (or possible mixed one in), you WILL know it as soon as you start the car. The thicker head bolts will make a LOUD noise when it hits the Tranny Inspection Plate. I do mean LOUD noise.

Your local Dealer Parts Guy will have them and then you will know that you have the correct ones.

[powermaxx]

Thanks for the info. Found some locally at the dealer (they like my GLHS )