WTB: Daytona liftgate plastic

[martin kolner]

ANY 1984-1993 Daytona liftgate striker plate cover that is on the back of the liftgate either with or without rear wiper is OK as long as it is unbroken, especially at the two places where there is a phillips screw.

[martin kolner]

Here is a non-rear wiper example. The normal breaking points are at the outer two phillips screws. The 4 remaining color coded pushpin holes usually do not break.

[Force Fed Mopar]

I think I have one in red, if that's okay.

[Force Fed Mopar]

I have 2, but both are broken by the pass screw. Not bad, screw still holds fine, but a small piece is missing of the edge.