Results 1 to 7 of 7

Thread: water injection

  1. #1

    water injection

    do u think it will me a good investment on my 86 s/c t2

  2. #2
    Hybrid booster
    Join Date
    Jan 2006
    Location
    London, Ontario
    Posts
    471

    Re: water injection

    It works very well to get that extra bit of boost without having to pull to much timing. I have my car set up to use a two stage system this summer. A small jet for when boost just starts (1 - 8 psi) then the big jet kicks in after that. I have a third jet installed in cse I need more water. If you're not running a intercooler (using log) then it works very well. I disconnected the knock sensor on my old log setup (noisy top end was giving false triggers) and then ran water pump and mcmaster carr nozzle and a pressure switch like a fifth injector setup. Doing this made the car so much faster. I believe the Lm was pulling a ton of timing before.

  3. #3
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: water injection

    Quote Originally Posted by 87turbodance
    It works very well to get that extra bit of boost without having to pull to much timing. I have my car set up to use a two stage system this summer. A small jet for when boost just starts (1 - 8 psi) then the big jet kicks in after that. I have a third jet installed in cse I need more water. If you're not running a intercooler (using log) then it works very well. I disconnected the knock sensor on my old log setup (noisy top end was giving false triggers) and then ran water pump and mcmaster carr nozzle and a pressure switch like a fifth injector setup. Doing this made the car so much faster. I believe the Lm was pulling a ton of timing before.

    Do you have any pics of your setup?

  4. #4
    Moderator Turbo Mopar Staff dodgeshadowchik's Avatar
    Join Date
    Dec 2005
    Location
    Leaving on a Jet Plane
    Posts
    1,803

    Re: water injection

    i was just going to post a topic on this. i was reading MM&FF magazine at work yesterday because i read all the other magazines already, and i came across an article on methonal/water injection on boosted applications. it seemed like a reletivily easy setup and inexpensive, as well. they produced some really good results. i guess i don't see any reason it wouldn't work well on a turbo dodge. oh, i don't know how true this is, but the magazine claimed their mustang saw a 67 HP increase using the setup.

  5. #5
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Mooresville, NC
    Posts
    451

    Re: water injection

    Quote Originally Posted by 86shelby15psi
    do u think it will me a good investment on my 86 s/c t2
    That really works. I gained 24hp and 55lbs/ft(dyno tested) advancing timming and raising boost with no knock.

  6. #6
    turbo addict
    Join Date
    Dec 2005
    Location
    Nunnelly, TN
    Posts
    2,173

    Re: water injection

    Check this out:
    http://members.cox.net/stevemonroe/AlcoholInjMod.html

    I may try it down the road.
    Kevin Isenberg EVERYTHING is for sale!

  7. #7
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: water injection

    Quote Originally Posted by GLHS592
    Check this out:
    http://members.cox.net/stevemonroe/AlcoholInjMod.html

    I may try it down the road.
    Thanks for the link.

Similar Threads

  1. Picked up a OLD spearco water injection kit!
    By ShadowFromHell in forum H2O / N2O/ Alky Injection
    Replies: 11
    Last Post: 09-16-2011, 10:12 PM
  2. water vapor injection
    By Xtrempickup in forum H2O / N2O/ Alky Injection
    Replies: 4
    Last Post: 03-14-2008, 06:02 PM
  3. #4 coolant mod question
    By supercrackerbox in forum Engine - Block, Piston, Heads, Intakes
    Replies: 30
    Last Post: 01-19-2007, 01:07 PM
  4. The #4 Coolant Mod... ---------- Converted
    By Frank in forum Old FAQ Info
    Replies: 1
    Last Post: 11-05-2006, 05:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •