Okay, I know this subject has been brought up a couple times, so here's some pics of my project. Its a .60 A/R compressor with the .63 turbine.
I'm going to have to weld on a cast elbow to the outlet.
Here you can see that the swingvalve acuator arm is pretty much positioned in a spot where you can't even use it. The first pic is with a universal style T3 swingvalve, and the other two are the stock ford swingvalve where I modified the actuator arm to try to be able to use the stock wastegate, no dice. So I'm going with an external unit, that way when I step up to a hybrid later I'll already be set up.
[IMG]http://i22.photobucket.com/albums/b318/altered7151/IMG_0840.jpg
[/IMG]