just looking at trying to save 150 bucks for other things who would be willing to share a few pics i have access to a welder and can do it pretty easy if i have some good pics and all
thanks all
just looking at trying to save 150 bucks for other things who would be willing to share a few pics i have access to a welder and can do it pretty easy if i have some good pics and all
thanks all
This is simple, and it works
best 1/8 ET-6.16 sec. best 1/8 speed-119.70 Best 1/4 MPH 145.5, Best 1/4 ET 9.65 sec. 8 valve NO NITROUS!!
Warren, everything you do looks awesome!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
what is that screen just mesh ?? alsoo what about conering and oil splashing???
Uni directional screen is from Moroso or Jegs. oil pan should be baffeled. Road race and drag race require different pan designs. I can post pics of my drag pan later.
best 1/8 ET-6.16 sec. best 1/8 speed-119.70 Best 1/4 MPH 145.5, Best 1/4 ET 9.65 sec. 8 valve NO NITROUS!!
all i want to do is add some extra protection will take it semi hard on turns when i do drive it and will also take it to the track here and there
i have pics somewhere. i think they are on my desktop, haven't turned that one since i got this laptop... i'll fire up that old compy tomoro night or sunday and look for those pics. i just welded ours in recently, and i know i have pics.
Warren, you have that attached to a crank scraper as well?
Yup, scraper is in the first picture
best 1/8 ET-6.16 sec. best 1/8 speed-119.70 Best 1/4 MPH 145.5, Best 1/4 ET 9.65 sec. 8 valve NO NITROUS!!
Very nice work as allways, even the pickup is opened up w/ perfect cuts
I would like to see the baffled tray also
yes so would i lol
Here are some pic of the Hinged Gate Windage tray that we have been running in my sons93 Daytona 2.5 Turbo for about 2 years. It works great.
http://www.pbase.com/rmscott/baffled_oil_pan
Ralph Scott
93 Daytona Iroc R/T
www.pbase.com/rmscott
Tow Vehicle/Daily Driver:
02 Dakota Quad Cab 4x4
http://www.pbase.com/rmscott/ralphs_dakota_quad_cab
ralph u gonna be a carisle ?
Ralph Scott
93 Daytona Iroc R/T
www.pbase.com/rmscott
Tow Vehicle/Daily Driver:
02 Dakota Quad Cab 4x4
http://www.pbase.com/rmscott/ralphs_dakota_quad_cab
i was there last there i was with tom (red rt) gonna have my 90 vnt there was there 3 years ago before the build