Results 1 to 8 of 8

Thread: Need some help choosing a ic

  1. #1
    Hybrid booster
    Join Date
    Jan 2006
    Location
    Mine hill, nj
    Posts
    965

    Need some help choosing a ic

    I im in the market for a ic and would like one with a inlet and outlet on the same side

    http://cgi.ebay.com/ebaymotors/FMIC-...QQcmdZViewItem


    but someone told me that they are not nearly as efficient as a typical one side inlet and all

    are they just as good or what ??


    thanks

  2. #2
    turbo addict Murphy's Avatar
    Join Date
    Dec 2005
    Location
    Baltimore, MD
    Posts
    1,670

    Re: Need some help choosing a ic

    you got to look on what way they floe. that one flows top to bottom so it is direct and flows good. some same side inter coolers are double pass, where it starts on one side, goes to the other then back, and out like this one

    http://cgi.ebay.com/ebaymotors/27x11...QQcmdZViewItem
    95 spirit 3.0/543 15.0@91 N/A, 14.5@96 on a 50 shot RIP 87 shelby Z - project car, maybe I can drive it this year 91 spirit - roll it, chop the top, do some burnouts! RIP

  3. #3
    Hybrid booster
    Join Date
    Jan 2006
    Location
    Mine hill, nj
    Posts
    965

    Re: Need some help choosing a ic

    ok so top to bottom is good and the cross isnt ??

    what about this this should work good
    http://cgi.ebay.com/ebaymotors/Ford-...16762866QQrdZ1

  4. #4
    turbo addict Murphy's Avatar
    Join Date
    Dec 2005
    Location
    Baltimore, MD
    Posts
    1,670

    Re: Need some help choosing a ic

    the sharp 90* looks bad...

    if you gonna go with something of that style i would look at a SRT4 one, i hear they are good to over 300hp

    http://cgi.ebay.com/ebaymotors/SRT-4...spagenameZWDVW
    95 spirit 3.0/543 15.0@91 N/A, 14.5@96 on a 50 shot RIP 87 shelby Z - project car, maybe I can drive it this year 91 spirit - roll it, chop the top, do some burnouts! RIP

  5. #5
    Hybrid booster
    Join Date
    Jan 2006
    Location
    Mine hill, nj
    Posts
    965

    Re: Need some help choosing a ic

    i am gonna put it into a g body and its gonna go though where the stock ic was so then i guess its gonna have to be this one then


    http://cgi.ebay.com/ebaymotors/FMIC-...QQcmdZViewItem


    the srt4 wont work unless im gonna cut up my rad support

  6. #6
    Hybrid booster
    Join Date
    Dec 2005
    Location
    MID MICHIGAN
    Posts
    317

    Re: Need some help choosing a ic

    i had an srt in my '88 shelby. i had to cut a little of the access metal that was on the sides of the rad. it wasnt structual though. and i did it with a cutting disk on a drill.

  7. #7
    Hybrid booster
    Join Date
    Jan 2006
    Location
    Mine hill, nj
    Posts
    965

    Re: Need some help choosing a ic

    dont want to cut into the rad support

  8. #8
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,351

    Re: Need some help choosing a ic

    Quote Originally Posted by Mr overkill View Post
    I im in the market for a ic and would like one with a inlet and outlet on the same side

    http://cgi.ebay.com/ebaymotors/FMIC-...QQcmdZViewItem


    but someone told me that they are not nearly as efficient as a typical one side inlet and all

    are they just as good or what ??


    thanks
    That one looks good one to me for a single side inlet/outlet.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •